Search results

  1. alldodge

    Maybe my turn for new boat time

    Cobalt was the only contender other then Formula so no real discussion on when
  2. alldodge

    Maybe my turn for new boat time

    The Cobalt dealer sent me the cost sheet, and I'm going to work thru it on the R8. Not sure with everything pump up so much anything will happen this year, but there is a slight chance, very slight. Prices to high and to top it off, won't get the boat until maybe this time next year
  3. alldodge

    A mercruiser 4.3l MPI with a low weak idle hard to start

    Can spray wd40 around the intake and throttle body to see if ram changes.
  4. alldodge

    Maybe my turn for new boat time

    Made it back home, Yea , good to be here
  5. alldodge

    A mercruiser 4.3l MPI with a low weak idle hard to start

    140 is better but not great What is the deviation of the compression numbers? When idle is below 400 rpm the ALT voltage is low, temp is cold and MAP is where it should be "IF" readings are correct When MAP shows 9 psi the voltage should read about 2.8V At 8 psi reading should be about 2.3V...
  6. alldodge

    Re-upholstery Job on Cruisers Yacht 338 Bowrider

    Must have easy access to beer, its a beer/boat law I'm sure :cool:
  7. alldodge

    Maybe my turn for new boat time

    Could be, might be used in another couple years
  8. alldodge

    Maybe my turn for new boat time

    Didn't se cruisers there. The prices were higher and while we could still do it, but might wait till end of season or next
  9. alldodge

    Maybe my turn for new boat time

    The Formula, and the folks must of thought I couldn't afford it so they didn't even come to talk. Cobalt guy was from Lexington Searay then Chap Was wearing the wrong kind of shoes for this gig
  10. alldodge

    Maybe my turn for new boat time

    I was good we got to the place early (before 11) and things were not to busy. Around 1 it was turning into a zoo so we headed out. Not much chance to get good pics with everything crammed together, and I'm not a good pic taker First is just motors and next are the Cobalt R8
  11. alldodge

    1988 Rogue 2420

    Cool
  12. alldodge

    Re-upholstery Job on Cruisers Yacht 338 Bowrider

    Great craftsmanship
  13. alldodge

    Maybe my turn for new boat time

    Good deal thanks
  14. alldodge

    Maybe my turn for new boat time

    Lots of boats and have just a few pics,maybe post later this eve or tomorrow. Cost are up higher then when I just looked a few days ago. In Englewood now and going to salt springs later
  15. alldodge

    Chaparral backfiring a lacks power

    Might be fuel pressure
  16. alldodge

    Re-upholstery Job on Cruisers Yacht 338 Bowrider

    Looks great
  17. alldodge

    LED dash lights for a 2016 Four Winns H190?

    No issue other then if you want to dim it
  18. alldodge

    350 Mag couplers 18643A5 or 18643A7

    Don't think of it as a conversion kit, it's just the latest revision of the part. The number after the "A" is a revision indicator which can mean its using a different manufacture or there was a slight improvement to the part. Using the old version or new version are interchangeable
  19. alldodge

    Second fuel tank

    Don't know how good the fuel pump sucks, but think your looking at doubling the amount of fuel that would need to lifted do it. I'm seeing a single 1/4 inch fuel line going to 1/2 after the Tee. This means it has to pull twice the amount of fuel up. They will probably stay the same level...
  20. alldodge

    Bravo3 detent

    The shift cable should move easy with motor running. With cable disconnected from the shift plate, you should be able to shift drive with your hands just by moving the cable. If it shifts easy this way then check the throttle handle and cable to shift plate. If it doesn't move easy then its...
Top