Search results

  1. alldodge

    2001 Optimax SmartCraft Wiring / Questions

    Don't know how to test a smartcraft gauge by it self, but they all interpret data from the CAN network. If the network is connected correctly with a terminator then it should work.
  2. alldodge

    Rec gas prices???

    Diesel Home 439, Campbellsvile Kroger 439, Louisville 4.79 (G son B ball game :D ) Filled truck on return trip at Kroger with 1.00 off so 3.39
  3. alldodge

    Breaker

    With no power on one set of breakers look for the main. This is a shore power setup
  4. alldodge

    Re-upholstery Job on Cruisers Yacht 338 Bowrider

    Great work
  5. alldodge

    Wiring a three-prong Navigation switch

    Withe the switch being a single pole double throw (SPDT) you will need a diode. If switch was replaced with a DPDT it could be wired without using a diode
  6. alldodge

    Volvo Penta 2006 8.1 fuel injectors (OSI-BF 375 HP) Rinker 282 Captiva.

    I would not use the auto ones unless your sure they supply at same rate. If new and old are installed in a test machine side by side and verify they supply the same amount of fuel. Otherwise you may wind up burning a whole in a piston
  7. alldodge

    1966 Islander - Anyone had success installing a porta potty or other toilet solution in the bow/cabin area?

    Chems are just to reduce smell, they do not diodegrade
  8. alldodge

    Welding a gimbal housing yay or nay?

    Have not tried, but if its only in that area, roll the dice Personnel thought, is if it broke, I would replace it
  9. alldodge

    1966 Islander - Anyone had success installing a porta potty or other toilet solution in the bow/cabin area?

    Guys can get by but the ladies want one. My rinker cuddy came with one mounted under a cushion. Maybe @tpenfield has an idea
  10. alldodge

    2006 Volvo 5.7 osi-d crank no start

    The gasket blew between 3 and 5 so I'm seeing steam clean and not from fuel
  11. alldodge

    2006 Volvo 5.7 osi-d crank no start

    I don't see a lot a washing from fuel. Check the flatness of the head as mentioned prior. If its withing spec, clean, new gasket, torque to spec and run it
  12. alldodge

    89 5.0 fuel pump

    I would buy another, search on the part number and it will show up Carb cleaner is not that flammable. If gas won't fire then either spark is not making it to the plugs or its bad gas
  13. alldodge

    Alpha Drive wont wont go into Forward/Reverse

    The shift plate is normally mounted on the motor of exhaust. Disconnect the lower shift cable going the the drive from the shift plate and see if it will change the gears when pulled by hand out or in
  14. alldodge

    Alpha Drive wont wont go into Forward/Reverse

    Don't know if @achris is at home or nearby Being a 2014 would it happen to have digital controls or cable, and does it have Axius? When motor is running, look behind the motor to see if the drive shaft is turning When shifter is moving FWD/REV see if cable is moving the shift plate
  15. alldodge

    3.0 mercrusier runs badly after it warms

    What carb is it, a TKS or Merc? Got a serial number?
  16. alldodge

    Mercruiser MC-1 Hydraulic Ram Hose Leaking

    Look on the inside of the ram, the line should go to the end
  17. alldodge

    2000 BF90 Carb Starter Amp

    Don't put a fuse inline with the Bat cable, just protect the cable
  18. alldodge

    MerCruiser 496 HO 2008 - Engine Alarm (constant sound)

    Agree, looks like exhaust over temp alarm Need to get the motor scanned If the smoke is only seen on one side it's probably a head gasket Edit: The volt meter showing below 14V so if its accurate then there is another problem
  19. alldodge

    2006 Volvo 5.7 osi-d crank no start

    Suggest Put a steel straight edge on the heads and use feeler gauges to see if flatness is within spec
  20. alldodge

    2006 Volvo 5.7 osi-d crank no start

    Pattern
Top