Search results

  1. alldodge

    deer meat question

    Pork and deer are both lean, deer more so. Need some fat
  2. alldodge

    2003 Ebbtide Mercruiser 3.0 engine rattle? Normal?

    The main jet can look different so long as the hole is the same size
  3. alldodge

    Alpha 1 gen 1 steering actuator replace with gen 2

    Mine was a Bravo and I know they are all the same. Was hoping others would say if Alphas are the same, I think they are
  4. alldodge

    Alpha 1 gen 1 steering actuator replace with gen 2

    I bought one with the quick fittings but din't use them because I didn't want to buy them for the lines coming from the PS pump. Just removed and installed direct with cheap brass fittings
  5. alldodge

    Surge brakes lasted 1200 miles of highway, whats wrong

    If wheels lock up and when released they spin easy again then they are working as they should. The shock is there to soften the trailer moving forward when brakes are applied or when on bumpy roads. Now if the trailer doesn't have the right amount of tongue weight it may bounce back n forth...
  6. alldodge

    Surge brakes lasted 1200 miles of highway, whats wrong

    Then I would think the same issue but MC must be clogged. Either that or setup is wrong, might need a pic of how it rides. Disconnect trailer then put receiver hitch in trailer coupler. Jack up one wheel and spin to see if its fee. If its free, push receiver down as hard as you can to engage...
  7. alldodge

    Surge brakes lasted 1200 miles of highway, whats wrong

    First guess is the master cylinder is not designed or modified for calipers. If its a unmodified brake shoe master cylinder (MC), then it doesn't allow for bleed back without pressure from brake shoe return springs. The MC can be modified by make a small hole in the valve at the brake line...
  8. alldodge

    Alpha 1 gen 1 steering actuator replace with gen 2

    Agree with Bondo, don't need to upgrade to the quick attach fittings, threaded works fine. They were added to make it faster for dealers with little to no leak. Correct me if I'm wrong Bondo, But the Gen 2 steering actuator should bolt right up. I think the transom plate is basically the same
  9. alldodge

    Used boat I might buy

    Entry level boat, good starter type That said, with the price, where its located and only one post I would say this might be the owner posting he wants to buy :unsure: sort of thing
  10. alldodge

    2003 Ebbtide Mercruiser 3.0 engine rattle? Normal?

    Running a tad rich, maybe the increased gap will help Check the exhaust shutters for the rattle
  11. alldodge

    Wiring diagram for 5.7 GSi PEFS? Or AQ271C? Ideally both?

    GSI
  12. alldodge

    Freezer door not freezing

    All good
  13. alldodge

    Removal / Fitting Duoprop

    Of a 2x4 right?
  14. alldodge

    MerCrusider Fuel Rail - is there an alternative?

    Also check the fit of the AC Delco number 12575055 I'm guessing but it "looks" like the same part
  15. alldodge

    MerCrusider Fuel Rail - is there an alternative?

    Partsvu shows one https://www.partsvu.com/fuel-rail-reman-8m0132702.html
  16. alldodge

    How to build a super heavy duty 6600lb trailer mover

    Nice, and also ask about steering? Maybe a detachable piece of pipe that that comes out on the port side
  17. alldodge

    Re-upholstery Job on Cruisers Yacht 338 Bowrider

    Craftsmanship
  18. alldodge

    2008 Glastron GXL dash help

    Or you could install and ACR (automatic charge relay) and just leave it on 1 unless need the other Bat to help start
  19. alldodge

    2008 Glastron GXL dash help

    Don't know unless there are either 2 transducers (bow, stern) but don't think they would do that. Or one way it stays ON and the other works off key, or they didn't have a single position switch and just used the double So far as charging It depends on where the ALT wire goes. If it goes to...
  20. alldodge

    2008 Glastron GXL dash help

    I'm sure its factory installed, but you while you could connect charger clips to those connections, it isn't normally done to charge. If your engine hatch cannot be opened manually and must use the hatch drive, then that's there encase the battery goes dead Look under the hatch and see if...
Top