Search results

  1. alldodge

    Normal charging voltage

    Engine and battery charger off and your at 12.5V and not bad, full charge is 12.7V Don't see the isolator as a problem yet. With motor rev real short above 1800 should start the ALT charging at full 14.5V. If you can read 14.5 at the ALT and stay there. The isolator would drop the voltage...
  2. alldodge

    Normal charging voltage

    Should be closer to 14.5V Might have a shorted cell. What is the voltage with motor off?
  3. alldodge

    Hunting Turkey w/o a license cost over $800

    Dealer said there is one in Atlanta so its 50/50 if its actually there. Orderede it, and shouldn't have. Cost 640 MSRP and could have ordered thru mopar online for 450, but it done. Should be in tomorrow
  4. alldodge

    Hunting Turkey w/o a license cost over $800

    Yep the new one
  5. alldodge

    2005 4.3 Intermittent Stalling issue

    Don't think its the switch, Does it die quick like turning the key off, or gasp and die like running out of gas? Serial number?
  6. alldodge

    Mercruiser Bravo 3 Grinding Nose Only When Turning Left

    Is the noise coming from the helm or sterndrive? It makes the noise when idling If at the helm it might be the rack If at the sterndrive, then check the power steering ram. Check fluid level
  7. alldodge

    Will Vesselview Mobile work on my 4.3MPI

    I just called Merc and verified that you can install VV. Will need the termination resistor at the engine also
  8. alldodge

    Will Vesselview Mobile work on my 4.3MPI

    A link https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwjh67_Xs87xAhWJl2oFHVBxCs4QFjAEegQICRAD&url=https%3A%2F%2Fwww.mercruiserparts.com%2FAttachment%2FDownloadFile%3FdownloadId%3D42&usg=AOvVaw3BbiQwP3DAIke_rPHrQ5XV
  9. alldodge

    Will Vesselview Mobile work on my 4.3MPI

    Do you have the 14 pin engine connector and 10 pin CAN plug?
  10. alldodge

    Bayliner Capri 2150 resurrection.

    Coming along nicely
  11. alldodge

    Hunting Turkey w/o a license cost over $800

    Dealer was closed yesterday, will try again today. I'm lucky it was a direct hit on the headlight. No damage anywhere else. I taped the plexiglass lens back in place for now.
  12. alldodge

    Bravo 3 shifting stiff. Cures?

    With motor running and lower shift cable removed from shift plate, can it be moved by hand with little effort FWD/REV? If it can lower is good, and problem is the throttle handle or throttle shift cable
  13. alldodge

    VP 4.3GL Bogging over 3000rpm

    What were your compression numbers? Timing 10* BTDC
  14. alldodge

    Will Vesselview Mobile work on my 4.3MPI

    The SN shows 555 ECM NO expert but if the motor has a CAN buss with the 14 pin connector, then it should work Would suggest Rinda scanner over vessel view. Either Diacom software or Techmate Pro. This way there is no need to check out how to install VV just get one of the above and the...
  15. alldodge

    Hurth transmission help

    If the dipstick has threads then its checked by not threading in. If dipstick does not have threads then its inserted fully to check Oil pressure should be 25bar (363 psi) No for sure but there is a allen hex plug on the shift selector, should be able to get the pressure reading from it Is the...
  16. alldodge

    Boat Wouldnt

    Still thinking Neutral safety switch Turn key to start and hold, now grab the throttle and move it slightly FWD and REV to see if it cranks If it doesn't then put a volt meter on the small yellow/red wire on the start assist relay. Turn key to start and see if there is 12V on the wire
  17. alldodge

    Hunting Turkey w/o a license cost over $800

    Dealer was closed Thanks, Did find someone which was changing out the head lights making his truck into a night edition, so I should be able to do it easy enough
  18. alldodge

    Hunting Turkey w/o a license cost over $800

    Going to call the dealer to see what the labor cost would be. Might do it my self if I can figure out how it comes apart. Will use some clear packing tape to hold the lens on until its done.
  19. alldodge

    7.4 mpi doesn’t want to idle?

    Get them cleaned and flow tested
  20. alldodge

    2012 Axis

    Manufactures defect that was not caught by QA
Top