Search results

  1. Scott Danforth

    OMC Cobra water pump

    I woul replace the impeller if you tried to suck water from a bucket. 10 seconds without water and the impeller is toast
  2. Scott Danforth

    confused about transom thickness overall.

    fiberglass boats 2-1/4" thick. aluminum boats - 2.0 to 2-1/4" which is the thickness of 1-1/2" wood and the skins. if you are replacing the transom wood with aluminum tubing, make sure you fully understand transom loading and how it transfers from the prop to the boat.
  3. Scott Danforth

    What oil is okay for Volvo marine engine?

    what year volvo? which engine? SAE 30 is still available is this a V6 or V8? you can also run Rotella 15W-40 or 20W-50
  4. Scott Danforth

    Can anyone help me identify this boat model

    yes. do not forget to grease the PDS shaft (grease zirk just in front of steering actuator) and the steering shaft.
  5. Scott Danforth

    OMC Cobra water pump

    welcome aboard. as indicated, if trying to suck from a bucket, you will just burn up the impeller. you need muffs. if you want to use a bucket, get a bucket big enough to put the whole boat in it so the impeller starts with water 8" above it to prime the pump. factory manual is a great...
  6. Scott Danforth

    Can anyone help me identify this boat model

    the decal that says Volvo Penta 260A. should have been a 255A or B in 1979
  7. Scott Danforth

    Need help IDing my first boat

    before you spend any money on the boat. if it is a chrysler boat, there was balsa used in the structure. make sure that balsa isnt wet or rotten. as for motor, the 9.9 on there is lighter than any 20hp you will find. also the library at fiberglassics has the dart at 20hp max...
  8. Scott Danforth

    Can anyone help me identify this boat model

    a 260A is a 5.7 V8 with a flat tappet cam and a 650 CFM carb, in front of a volvo 280 drive would put the motor/drive combination a 1986. if the drive is a single prop, you use SAE 30 in the engine, drive, tilt, and power steering. if the drive is a duo-prop, then the drive gets SAE-GL5...
  9. Scott Danforth

    Low Trailer- Steep Driveway Problem

    Is the trailer level when connected to the truck? Yes or no? You may need a drop hitch
  10. Scott Danforth

    Pontoons - Growth from being slipped...what is it?

    Sno bowl toilet cleaner, a scrub brush, and a turbo tip in the pressure washer
  11. Scott Danforth

    What´s the best replacement for AQ271C (or 570) 5.7 GM engine, ideally stroker?

    If you want cheap, it wont be good. If you want good, it wont be cheap Suggest san juan (now orca) or find a complete CHAMP setup
  12. Scott Danforth

    What Lube to Pull (or Push) Fuel Fill Line through ABS Pipe?

    you are going to have to push and pull that fuel hose thru any bend
  13. Scott Danforth

    Tracing the trim problem

    you need the EVC manual (Electronic Vessel Control)
  14. Scott Danforth

    Trust the dealer?

    welcome aboard. how loaded will you be? just yourself? yourself and 3 buddies? as indicated above, it is assumed the average adult is 150#. some of us famine proof boaters are over 200#, some close to 3X what the average adult weights. so how much are you adding in terms of weight? gear...
  15. Scott Danforth

    Canoes Is there a department dedicated to canoes?

    Sears had multiple companies private brand stuff for them for years. As Bondo mentioned, doesnt matter. Its an old fiberglass canoe. Repair is no different than a fiberglass boat
  16. Scott Danforth

    Pontoons - Growth from being slipped...what is it?

    Which is why the prior owner paid someone to clean it with muratic acid and a pressure washer
  17. Scott Danforth

    7.5 Mercury Issues

    You need the venturi tube You also have dirt in the carb
Top