Search results

  1. Grub54891

    Interesting Steering Technique!

    Wow. Ya do what ya gotta do!
  2. Grub54891

    Heat transfer dope

    https://www.amazon.com/Silver-Thermal-Heatsink-Compound-Syringe/dp/B00M5G6AHY/ref=asc_df_B00M5G6AHY/?tag=&linkCode=df0&hvadid=309751315916&hvpos=&hvnetw=g&hvrand=3912480618455864700&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9019406&hvtargid=pla-761431552712&ref=&adgrpid=67183599...
  3. Grub54891

    How much power steering fluid does the system take (dual 5.7 Alpha 1 Gen 1)

    I know the fluid gets aerated when doing that procedure, it looks foamy when you get it filled. When the air settles out you may have to add a touch to top it off. Unless as others have stated, there is a leak.
  4. Grub54891

    Merc 5.7 cut out

    Yeah If you wiggled wires and it re-started, thats where you have to look for the bad connection, or bad switch.
  5. Grub54891

    Where to run anchor line?

    That might work but, if you are using rope I's put a short length of chain to the anchor. Then you can secure that chain with a safety chain to the cleat. If it's just rope it could break going down the highway and damage the vehicle behind you. Don't think you would want that to happen.
  6. Grub54891

    Best boat lettering removal?

    Forgot, yes those rubber eraser wheels work really well!
  7. Grub54891

    Best boat lettering removal?

    The heat gun or hair dryer works well, just don't get it to hot as the decal will come off in little pieces. Gently pull and it'll come off unless they are old and cracked.
  8. Grub54891

    Fiberglass cracking - BRAND NEW R4 Surf 2023

    My first thought from the first pics had me thinking it was damaged/repaired at the mfg end of it. Now it's cracking somewhere else, Yeah, I'd be on the phone with the dealer and mfg. I'd be firm but not bullying at first. If you get no satisfaction, get firm with them and contact a lawyer.
  9. Grub54891

    120 HP mercruiser 153 ci 2.5 L issues

    Could be the condenser. Some are bad right out of the box.
  10. Grub54891

    120 HP mercruiser 153 ci 2.5 L issues

    Fuel supply. Did you check the fuel pickups? Try running on a remote tank and see if it changes.
  11. Grub54891

    Need to check shutters… any tips?

    They usually are closed when sitting. Mine were like your's and they didn't work properly. Replace them.
  12. Grub54891

    Need to check shutters… any tips?

    just did mine with the power tune lube like Bondo said. No need to remove the risers or anything. Took me about a half hour but I take my time.
  13. Grub54891

    I noticed I had milky oil when I checked dipstick. Last thing I did was clean the riser and replaced gasket. It never overheated. Ughhh

    I just went through this with mine, same motor. I changed the oil, put in the cheapest oil I could find and added sea foam. Ran it at the dock five minutes and dumped the oil again. Put in fresh good oil and filter. What mine was the exhaust flapper was shot allowing the inrush of the water into...
  14. Grub54891

    Well it happened. Water in oil

    After this weekend, no water in the oil after the kids ran her Pulling tubes and water sking. So far so good. The flapper seems to have cured it
  15. Grub54891

    Mercruiser 4.3 l 190 inboard outboard will not start after installing new battery changing a fuel filter and changing oil up

    Did it run before? It always helps to have more info. Model number and serial number of the motor is a must. Year is helpful also. We don't know if you are carb, or fuel injuncted. Let us know!
  16. Grub54891

    A question on exhaust flaps 1989 Stern Drive 4.3 [ 432APRMED ]

    Just installed new one in my MerCruiser. The old one was hanging down, open. The new one stays shut till there is water, and exhaust pushing it open. Mine had water intrusion issue and everything checked out fine till I found that. Water would inrush when slowing down from tubing/skiing. After...
  17. Grub54891

    Battery Died

    The parts store can load test your alternator and battery if you bring them in. If either is bad they will tell you. Always replace those parts with Marine rated parts.
  18. Grub54891

    Well it happened. Water in oil

    Well, I installed the new flapper, the old one was stiff but in place, wouldn’t close at all. Took it for half hour ride stopping from full throttle quickly and various speeds. Oil still clear. The real test next weekend on the 4th weekend when the kids run it hard and put it away wet! Lol. I...
  19. Grub54891

    What to use to patch hole on hull of Aluminum Boat

    It sure looks like a bullet hole being not centered on the strake. I’d have a welder touch it up As it’s below the water line. on my duck boat, it has bullet holes from before I bought it. But mine are above the water line. The po sealed them with tar and a screw. Maby I’ll fix them properly...
  20. Grub54891

    What to use to patch hole on hull of Aluminum Boat

    Put up a picture of the damage. Other than that, taking it to a good aluminum welding shop is the best option. kind of hard to figure out what you have going without a pic or two.
Top