Search results

  1. flashback

    Winterize

    You asked "How do you prove your boat wasn’t winterized properly". Short answer is you can't. Ultimately it's up to you but if you paid for it and it didn't go well, lesson learned, I try to do my own maintenance for this very reason, if it goes south I only blame myself and I make a few...
  2. flashback

    Replacing the steel cable on a boat lift

    Good point, we don't even know what he has. mine is a simple 4500lb drive with a 2 inch pipe over head..
  3. flashback

    Winterize

    93 model hmm. I have a 95 sbc and it overheated a couple of days ago. Might want to inspect the risers and manifolds. My riser looks like crap on the inside and if not enough water is moving through it you burn holes in the rubber boots on the exhaust and it will drip..
  4. flashback

    Clanking/rattling sound after prop change

    I only mention detonation because the 4 blade at the same pitch as your 3 blade would put additional load on your motor and make it more obvious but not cause it.
  5. flashback

    Clanking/rattling sound after prop change

    You might be hearing detonation, I agree, put the old prop back on
  6. flashback

    port side exhaust elbow over heating.

    I've read some info that suggests that the riser fails more often than the manifolds which could mean that I may be able to replace the risers only. How could I tell if the manifold is still serviceable? and what's your take on the aluminum manifolds for a fresh water boat. I think the stainless...
  7. flashback

    Coolant in 3 cylinders after winter storage? Hasn't been started

    I came on a little strong, apologies, lots of very good wrenches on the forum and they will hang with you..
  8. flashback

    Coolant in 3 cylinders after winter storage? Hasn't been started

    No expert here, but the center port looks to have a puddle in it an the valve don't look too good either. The riser looks like solid rust. I'm having a bit of a problem with exhaust myself at the moment. If it's a raw water cooling your winterizing procedure is totally wrong. Check out the forum...
  9. flashback

    Replacing the steel cable on a boat lift

    I did, like Alumarine said, the pulleys would be your main concern. As long as the gear plate and motor are capable.
  10. flashback

    port side exhaust elbow over heating.

    I jury rigged the garden hose to the riser and screwed it down to a chunk of 2x6 to block off the water passage that goes to the manifold. Turned on the water and it didn't have any water coming out of the exhaust end. It's gotta be really blocked up.
  11. flashback

    Weight distribution on trailer bunks and rollers?

    How many rollers do you have to support the hull?
  12. flashback

    port side exhaust elbow over heating.

    It looks like I have a bit of thinking to do. I just spent a couple of hours googling and there are a lot of choices other than cast iron although at my age the iron will probably outlast me. I saw some aluminum with stainless risers that seemed interesting. seems like that might be a good...
  13. flashback

    port side exhaust elbow over heating.

    A couple of pics of the other end of the riser. It doesn't look good to me. Every thing else is probably about the same, I'm thinking it's time for a new exhaust complete.
  14. flashback

    Want to make my 350’s louder

    I like a nice rumble but I wouldn't call it loud.
  15. flashback

    port side exhaust elbow over heating.

    A bit of background, I got the boat last summer and after replacing the rubber bits and gimbal bearing, shift cable I ran it through the break in procedure for a new SEI drive because the PO had it installed but never broke it in or used it. The way the bearing was screaming I'm happy he didn't...
  16. flashback

    port side exhaust elbow over heating.

    Thanks for digging into this with me.. Yes the down elbow was already getting warm the riser and manifold still cool, it seems like the water isn't getting into the down elbow or maybe the flapper being stuck was holding the water from getting out.. something bent the flapper rod unless it's...
  17. flashback

    port side exhaust elbow over heating.

    Can you still get metal flappers, I can straighten it out if needed. How can I test the riser for flow, I thought maybe just Hook it to a hose and see where the water comes out..
  18. flashback

    port side exhaust elbow over heating.

    No, I didn't run it long enough to get hot cause at that point I wanted to get it apart without burning my lilly white fingers. What should I look for on the riser? I picked a bit of rust out of it.
  19. flashback

    port side exhaust elbow over heating.

    Finally had decent weather and was able to work on the boat today. I pulled the hoses from the riser and manifold and water flow seems good. So I put them back on and cranked it up to see if the elbow would heat up. I saw water coming out of the lower exhaust boot at the y pipe so pulled the...
  20. flashback

    Weight distribution on trailer bunks and rollers?

    I may be mistaken but I believe that the bunks support the boat and the roller is just a guide to keep the boat centered..
Top