Search results

  1. Scott Danforth

    I/O (Sterndrive) Conversion to Outboards

    I got the idea from an old salty sailor about 15 years ago.
  2. Scott Danforth

    I/O (Sterndrive) Conversion to Outboards

    Unlike the Mars rover design team. most engineers use about 3 or 4 units of measure depending on the customer. And get the conversions correct. I personally like furlongs per fortnight for velocity and cubits for length when in conversation just to throw people off. We also know that a...
  3. Scott Danforth

    I/O (Sterndrive) Conversion to Outboards

    similar over-build as my Rogue
  4. Scott Danforth

    4 cylinder pushrod cover replacement?

    a standard m14 or 9/16" "ring spanner" will work. however you may need to bend it for clearance, hence the "special tool" moniker key to removing the distributor to help you get it back in easily.: manually rotate the motor to TDC on cylinder #1 mark the location of the rotor on the dizzy...
  5. Scott Danforth

    2025 Splash of the Year Nominations!

    does the admiral know you have a spreadsheet? we will take beer as hush money
  6. Scott Danforth

    Just thought I'd share a nice photo.

    MTV from then they actually played music?
  7. Scott Danforth

    projects other than boats

    in respect for the Artemis II project. All seriousness aside. a great team of engineers that once worked for me worked on the bird.
  8. Scott Danforth

    Removing a 1979 Grady White steering bezel

    look on the back-side of the console
  9. Scott Danforth

    Almost there

    Then there would be fluid in the bilge Leaks normally pass fluid from the oil side to the water side (no milky fluid) as the return is at about 30 - 50 psi and the water side is at a much lower pressure
  10. Scott Danforth

    1998 2100 walkaround fuel guage location?

    Check if they routed the fuel gauge to the NMEA 2k and are showing it on the display
  11. Scott Danforth

    Almost there

    Check exhaust for oily residue. The PS cooler may be leaking
  12. Scott Danforth

    Replacement Gauge

    Kendar Marine (Great Lakes Skipper) and Marine surplus are both companies that buy old stock from boat OEMs and list them individually Here is a full set...
  13. Scott Danforth

    Pushing Run-Flat tires to the limit

    Get a small compressor and a plug kit. The little umbrella plugs like AD posted work All my vehicles have a compressor and plug kit in them. Used them a few times over the years My daily whip doesn't have run flats, and it doesn't have a spare. It came with an ultra cheesy plastic...
  14. Scott Danforth

    Almost there

    Run...... It's going to blow...... Nah, run it. As Captain Ron stated, if anything is going to happen, it's going to happen out there
  15. Scott Danforth

    Replacement Gauge

    Verify the gauge has failed. Is it just one of the air cores? Or all 3. Because if all 3 gauges are not working, it's either power or ground
  16. Scott Danforth

    which carb to upgrade/replace too

    Summit racing ships to the UK
  17. Scott Danforth

    which carb to upgrade/replace too

    Get a new bowl and swap it over. As I stated earlier, only 6 moving parts
  18. Scott Danforth

    Tiny boat performance help

    My Wooster Hellion required you to lean forward over the steering wheel until you are on plane I made a mini set of trim tabs (mini version of Bennett sport tabs. The plan was to use Bimba air cylinders and a Bennett pump unit. Sold the boat before trying them
  19. Scott Danforth

    Tiny boat performance help

    A piece of PVC pipe for a tiller extension Also add trim tabs to extend the running surface
  20. Scott Danforth

    Old 4hp Evinrude takes a nap

    you should have replaced the impeller BEFORE running it.
Top