Search results

  1. Scott Danforth

    I/O (Sterndrive) Conversion to Outboards

    you going to fill that pocket with foam and skin it?
  2. Scott Danforth

    Family of 5, 19ft or 21ft?

    the ford roll-overs were primarily because the ford/firestone relationship and the 721 tires being used under heavy SUV's the tires failed, causing instability with socker moms driving.
  3. Scott Danforth

    I/O (Sterndrive) Conversion to Outboards

    Ted, regarding the tube, get a bit of fiberglass tube and glass it in since you are bonding the pod to the hull anyway. Im in agreement with @Pmt133 .... I cannot and will not support 3M sealants after the repeated failure of my boat which isnt used as often as it should. would hate to see a...
  4. Scott Danforth

    Bevel Prop Washer

    most likely 17-7ph. should have a dull greyish tint. will eventually "patina" in salt water. the 300 series bellevilles loose their springiness when flattened.
  5. Scott Danforth

    Changing a 22 foot Starcraft Islander from I/O to outboard with the engine hanging on a modified transom.

    most people add a pod/bracket.
  6. Scott Danforth

    I/O (Sterndrive) Conversion to Outboards

    Ted, most of the armstrong brackets have a vertical drain. being aluminum, they simply weld a tapped boss in the aluminum, or if the material is thick enough, just tap the base material. I would take the garboard drain you show, recess it in the bottom of your keel on the extension. and use...
  7. Scott Danforth

    I/O (Sterndrive) Conversion to Outboards

    Not much change in boat stylings over the years...... Pointy end and blunt end with propellers
  8. Scott Danforth

    Bevel Prop Washer

    that is a belleville spring washer. (We used them in actuator clutch packs). fastest way to get them is McMaster Carr https://www.mcmaster.com/products/belleville-washers/disc-springs-2~/
  9. Scott Danforth

    I/O (Sterndrive) Conversion to Outboards

    Holy heavyweight batman
  10. Scott Danforth

    exhaust manifold.

    running the motor without the raw water flowing means that you burned up the rubber flappers and the couplings in the exhaust..... those little rubber bits have a maximum temperature of 250F. your exhaust with water flowing is normally 200F. however without water, you were between 900F and...
  11. Scott Danforth

    exhaust manifold.

    is this a heat exchanged motor? Raw water cooled motor? without running fresh water, your exhaust temps are 900-1100. so any rubber in the exhaust system gets burned to a crisp and any water vapor in the exhaust manifold gets turned to steam
  12. Scott Danforth

    I/O (Sterndrive) Conversion to Outboards

    I'm going with 425-435
  13. Scott Danforth

    Specs for external "shop" tachometer

    I have a laser photo tach I use on 2-strokes I have 5 old tach / dwell meters that I use. One of them was my father's from the 60's, one is mine from the 80s, and the other is from my wife's late father and 2 from a garage sale. Paid $8 for the last two about 2 months ago My recommendation...
  14. Scott Danforth

    Been a little cold.

    From my bud in Sturgeon Bay This was yesterday when only 24" fell. Today total is 3' +
  15. Scott Danforth

    Maybe my turn for new boat time

    Craparral is now part of Mastercraft.
  16. Scott Danforth

    95 Sea Ray 230 Sundancer stringer repair

    a 4-1/2" saw blade will also chuck up in a 4-1/2" angle grinder. I do not recommend that.
  17. Scott Danforth

    I/O (Sterndrive) Conversion to Outboards

    I keep the beer in the ice bucket....
  18. Scott Danforth

    I/O (Sterndrive) Conversion to Outboards

    in florida heat, I make smoking trophies...... a lot of smoking trophies..... Resin also solidifies in the pail without MEKP in the storage cabinet on really hot days.
  19. Scott Danforth

    which carb to upgrade/replace too

    you can test it, just put a bit of fuel in the bowl (at an angle), covering the check valves of the pump itself and actuate. if you havent run the boat in a few weeks, the fuel will evaporate out of the vent tubes. very common. also common for dirt daubers to build nests in the vent tubes if...
  20. Scott Danforth

    anchor line

    You spelled Netherlands wrong. LOL when it comes to marine line, the best come from the Netherlands, or Netherland based companies in the US. you wont find this rope on Amazon, Anchor.com, etc.
Top