Search results

  1. demarko210

    What size transom mount trolling motor for my boat?

    I have seen some pontoon boats and other 20ft vhull boats with electric trolling motors. I was wonder what size would i need for my boat? 19ft grady white mercury inline 6.
  2. demarko210

    Mercury 110 #3183164

    I can not get the motor to turn on the swivel. I added grease at the connector and it still doesn't not turn left or right. Do I need to replace something or heat it?
  3. demarko210

    Inline 6 serial 5314656

    Chris1956 The inner water jacket cover, is that what the arrows are pointing to 24 bolts? and where is the the crank seal? i am not a mechanic but if i can find it and see how it comes off i can do it. Thanks for the help!
  4. demarko210

    Inline 6 serial 5314656

    Chris1956 Chris the why my engine is set up its not to much work. Yesterday it took me about an hour to remove the exhaust plate. Here is an image of the work. The bolts came out easy. Since emc told me that it is an aluminium block i will use some anti-seize with on the bolts when i replace...
  5. demarko210

    Inline 6 serial 5314656

    On the port side at the bottom near cylinder 6 there is water spraying out. Can someone tell me the correct part or gasket to buy to fix this? My compression reading are 100 100 110 110 110 95 thanks. The entire cover where the throttle arm is will need to come off. Can someone tell me the name...
  6. demarko210

    Spark Plug to Coil

    I was changing my spark plug wires and i removed them all and cut some new ones. I forgot how they went back on and the picture that i taken its not clear. i wanted to ask you how does the spark plug wire line up from spark plug 1-6 to its respective coil 1-6? is it plug 1 to coil 1, plug 2 to...
  7. demarko210

    Mercury inline 6 wont idle

    My serial number is 5314656-5600966. Here is what i have done. clean fuel tank, new sending unit in tank, new fuel line, rebuilt carbs, rebuilt fuel pump, used rebuilt lower unit, and plugs. compression 95,95,100,100,110,95. is this ok??? I am in the process of rewiring the harness assembly...
  8. demarko210

    Upper Shift Shaft I6 115hp

    I have attached a picture of the item. the upper shift shaft that is connected to arm by a lock nut which entails moves the shifter cable along the guide. I replaced this lock nut with a new one and now when I tighten the nut the shifter from the control is impossible to move from F to N to R. I...
  9. demarko210

    battery terminal crossed by shop 115 mercury I6

    I am new to boating as of last July. I purchased a 19ft grady white weekender cc with a 115 hp inline 6 5314656. i took it to a repair shop near me. they clean the carbs, installed a new bilge pump, and did a boat inspection for me. Well after getting the all green i take it to the ramp and try...
View older results
Top