Re: Deck coating / Turned complete restore
All the boys are workin' so I'll chime in. I use same % for pb as I do for my resin. I live in south florida where it is currently 90 hot degrees, so keep in mind to adjust according to your temps. I go a little lite (1%-10 drops to one ounce) especially if I know that I can roll her out in the hot sun....she gonna kick, no matter what. You be the judge. Also, I pre-mix my PB with resin, cabosil, & chopped fibers ahead of time because I don't have much work time due to high temps here. Just be sure you really mix well once you catalyze. I will often catalyze half way, mix, then put the other half in. Knock wood, never had a problem here. Good luck. Like your progress.
All the boys are workin' so I'll chime in. I use same % for pb as I do for my resin. I live in south florida where it is currently 90 hot degrees, so keep in mind to adjust according to your temps. I go a little lite (1%-10 drops to one ounce) especially if I know that I can roll her out in the hot sun....she gonna kick, no matter what. You be the judge. Also, I pre-mix my PB with resin, cabosil, & chopped fibers ahead of time because I don't have much work time due to high temps here. Just be sure you really mix well once you catalyze. I will often catalyze half way, mix, then put the other half in. Knock wood, never had a problem here. Good luck. Like your progress.
How many quarts did you use? Did you drill any additional holes to allow PB to ooze thru the transom?
