Latest activity

What's new New posts Latest activity

Scott Danforth replied to the thread Thermostat too dirty.

Clean the upper unit so the spacer fits

Saturday at 1:21 PM
L
lvhdude replied to the thread 5.8l efi idles too fast.

So the first pic is a connector by the front of the engine near the thermostat that I can't find a connector for, but it sure looks like...
Saturday at 1:19 PM
A

Amphipod reacted to airshot's post in the thread 1957 Johnson Seahorse 35hp value? with Like.

Fewer folks are capable of repairing nowadays, we have become or are turning into a throw away society. With high labor costs and...

Saturday at 1:16 PM
K
keithb7 replied to the thread 1979 9.8 Carb Bowl.

Following up to share success in resealing the bowl. I cut the seal. I fit it in place and cut off a piece as it was too long. I fit...
Saturday at 1:15 PM
dingbat replied to the thread Temp sender removal ….

Two ball peen hammers. Put the small head on the “bolt” and smack the face of the hammer a couple of times with the other. Breaks loose...

Saturday at 12:57 PM
ESGWheel replied to the thread Why don't sea choice 1 1/16 seals fit?.

If I may, here is a good inexpensive tool to add to your collection if you do not already have one (link). And here is a how-to vid on...

Saturday at 11:39 AM
M

mnalley4 reacted to airshot's post in the thread Newbie boat owner with Like.

If you plan on keeping this boat, I would beg, borrow, hunt, search, scour until you find a factory service manual for it. I have found...

Saturday at 11:38 AM
roscoe replied to the thread S A F E T Y B R I E F I N G.

Never say “hold my beer and watch this”. Better to be the one holding the beer.

Saturday at 11:34 AM
Scott Danforth replied to the thread Changing colour of gelcoat question.

Most boat interiors and upholstery substrate today are CNC cut PVC.

Saturday at 11:29 AM
C
carlos515 replied to the thread Changing colour of gelcoat question.

I forgot I made gel coat laminates for the top of my sides many years past. Never thought of PVC sheets. They may be good for the bottom...
Saturday at 11:25 AM
L

LWD replied to the thread Gauges recommendation.

Thank you for all the replies. I'll disconnect the battery, good idea. dingbat, I haven't considered it an over voltage issue, although...

Saturday at 11:23 AM
garbageguy reacted to Chris1956's post in the thread My boat needs to run real good on the 4th of July. FIX IT !! with Like.

Gee, I have the Atlantic ocean. Of course, sometimes the Atlantic Ocean tries to have me.

Saturday at 10:54 AM
frustratedboater posted the thread Prop Shaft "mid bearing" part number help in Yamaha & Suzuki Outboards.

I was rebuilding my 2004 Yamaha 225 (F225 TURC) gearcase and there is a bearing and the larger bearing/race that I am not seeing on...
Saturday at 10:53 AM
C

Chris1956 replied to the thread So, my 2025 Bayliner VR5 200 hp 4.5L mercruiser STILL barely pulls me up.

The advantage of hydraulic trim tabs is that if properly installed, when retracted, they are well above the transom/hull point and do...

Saturday at 10:45 AM
K
keithb7 posted the thread 1979 9.8 Carb Bowl in Mercury & Mariner Outboards.

I have been struggling to get the carb bowl to seal. I also ordered a new OEM Quicksilver gasket kit. It won’t seal. I’ve tried...
Saturday at 10:44 AM

Show older items

Top

View All

View All

View All

View All

View All

View All

View All

View All

Boat Bimini Tops

Boat Covers

View All

View All

View All

View All

View All

View All

View All

Latest activity

Follow Us