Search results

  1. Woodonglass

    1986 Brougham Bridger Yukon Delta Fishing boat renovation

    Soo this pic shows your stringers. Are you saying they have been core sampled and show no signs of water penetration or dampness? If so then OK, If not they need to be core sampled and replaced if found to be wet. Your drawing shows what I was referring to as a TUB constructed boat and the...
  2. Woodonglass

    1993 Sea Ray 200 Complete Floor and Stringer Replacement

    Check the 2nd link below in my signature. It has a LOT of good info. This link will help too
  3. Woodonglass

    Repairing screw holes in fiberglass and wood

    Not sure what you're getting at about the suitability of the products.
  4. Woodonglass

    1961 Lonestar Flamingo - SPLASHED w/Pics

    Ok, Sooo, after I paid for the motor getting fixed, I finally got time to launch and test. Took my son and 2 G-Kids to Liberty Lake about 10 miles from the house. It's a small local lake so not to many boaters. We got to the lake around 11:30 and Motor wouldn't start!!!! Well DUHH if you don't...
  5. Woodonglass

    Project Fuggly - No Longer Fuggly And Splashed!!!!!!

    Arch don't rotate your pics on your PC. If they look like they're rotated to the left...leave em and upload em. They'll appear in the correct configuration,.
  6. Woodonglass

    1961 Lonestar Flamingo - SPLASHED w/Pics

    For all the IBoaters never forget those who gave it all, so that we can have the Freedom to enjoy this weekend! Everyone stay safe and be Blessed!!!
  7. Woodonglass

    Materials List (First time resto, 92 GW Invader Deck Boat) [Splashed Aug 2019]

    It's fairly easy to make your templates using 2" wide strips of cardboard taped together. Doing it this way you can utilize smaller strips of cardboard and easier to get them to conform to the bottom outline of the hull This link will provide some good info Fabricating Decks, Stringers, and...
  8. Woodonglass

    1963 Pacific Mariner Lance (?) floor and stringer replacement

    Check this out...Fabricating Decks, Stringers, and Transoms PM me if you have further questions This list should give you a good start .
  9. Woodonglass

    Project Fuggly - No Longer Fuggly And Splashed!!!!!!

    Sorry for the Loss Arch! Maybe this will help a bit...
  10. Woodonglass

    1990 Sea Ray 160 Delema Help!

    You're looking at 2-3K for a budget and about 150-200 an hours of work. You'll need to remove the motor, cut out the deck stringers,motormounts, and transom and replace all the flotation foam. Repair all the chips and gouges in the hull and then gelcoat or paint. It's hot, itchy, stinky work...
  11. Woodonglass

    Chainsaw your Transom

    If you're contemplating doing a Seacast Pour In Transom repair, I think you'll find this quite informative. Some boats configurations lend themselves to this method better than others...
  12. Woodonglass

    Cheaper Cushion Idea

    No you will cut 10- 3" x 6" pieces and then lay them out. You'll have 10 glue joints. Like This...
  13. Woodonglass

    Glastron V196 restoration

    I painted my motor with Rustoleum and Acrylic enamel hardener. Had custom decals made too. Holding up very well.
  14. Woodonglass

    88 Sunray- Deck Transom and Stringers oh my!!

    Your transom will be approximately 2-21/4" thick. As the picture shows the top of it is covered by the fiberglass shell of the boat. The PB will adhere it to the hull and the the tabbings on the sides and the bottom will more than adequately hold it in place. I'm assuming the wood will extend...
  15. Woodonglass

    Larson restore

    Stand on your head when you take the pic!!!!:laugh::faint2::D
  16. Woodonglass

    Calling all glass guys . Where to cut my Proline ! ??

    Hatches for this style boat IMHO need to have a lip and the Lids recessed into the lip with a Rubber seal. Hopefully this crude drawing will illustrate what I'm talking about...IMHO these could be easily fabricated and glassed to the deck. Latches and hinges are easily found here in the iBoats...
  17. Woodonglass

    Calling all glass guys . Where to cut my Proline ! ??

    Having investigated your make and model of boat and listening to what you want to do, I'd recommend the following. Cut the cap as shown... This will allow enuf work room to replace the transom. Cut the deck as close to the hull sides as possible. You'll tab the New Deck to the hull sides and...
  18. Woodonglass

    18' Thompson Calae transom, stringers and deck

    Make sure the butt joints don't occur over a plywood seam.
  19. Woodonglass

    96 Celebrity 220 BR stringers, transom, and deck replacement.

    Squeegees and Bondo spreaders work pretty well, but... I'd highly recommend you use some rollers like these... and a bubble buster roller like this... They make things go SOOOOOOO much easier.
  20. Woodonglass

    1961 Lonestar Flamingo - SPLASHED w/Pics

    Well, well,well look who stopped by to say hello... I treated JBCurt00 to some good ole' Oklahoma Joe's BBQ I think he liked it!!! He bought a very KOOL 1957-8 FeatherCraft Racer In Texas and was on his way to Springfield, MO to look at a motor. We had a great 6 hour visit!!! It's always a...
Top