Search results

  1. alldodge

    Pontoon Boat Navigation Lights

    Welcome Post a pic of the light
  2. alldodge

    5.0 bravo 3 fresh water flush

    It can be, they come in different sizes
  3. alldodge

    5.0 bravo 3 fresh water flush

    Must have 2 valves One to shut off intake from drive and other to connect hose to Something like the webstone ball valve
  4. alldodge

    4.3 won’t start

    Check the ground connection on the pump One side comes from the FP relay which has 12V, the other goes to ground Pic is V8 but same as yours
  5. alldodge

    Parts website?

    Welcome There are numerous sites that sell VP props. I would just google search for VP props and several will come up. Then just compare price Hope you have done your home work before buying, unless your just getting the same replacement as you have now
  6. alldodge

    2001 Mercruiser 496 mag PCM555 overspeed warning

    The overspeed number would not give me any pause to not use the motor. Motor is fine if everything else is good
  7. alldodge

    Is a 4.3 Mercrusier Waterpump the same as a 4.3 Chevy waterpump ?

    Welcome Yes and No Yes it's the same design and fit as the Chevy but internally the impeller is brass. Now if you have closed cooling and not open, meaning you have a heat exchanger on the motor using antifreeze, then the Chevy can be used, otherwise you need a marine type
  8. alldodge

    2001 Mercruiser 496 mag PCM555 overspeed warning

    The overspeed count comes from the in-gear switch on the shift plate You can be running down the lake and if the in-gear switch tells the PCM the motor is in neutral then the count increases
  9. alldodge

    Trail camera issues fixed, now pics from them ...

    Probably the solor cell, just doesn't produce enough power. Either that or it doesn't work. Put it in the sun and measure
  10. alldodge

    Removing outdrive trimmed up a little bit?

    Pulling it out straight or a bit up makes no difference
  11. alldodge

    Removing outdrive trimmed up a little bit?

    There is no issue
  12. alldodge

    Axius Gen 1 Removal

    Hey @muc if you can have a look hear
  13. alldodge

    Cable ends

    Might be something you could find on a gas shock
  14. alldodge

    Mercruiser out drive compatibility

    Ok my bad But ratio is still going higher
  15. alldodge

    Bravo 1 to Bravo 3 Conversion

    Bravo changes upper and lower to get ratio
  16. alldodge

    Mercruiser out drive compatibility

    Using Bondos post He will have a 1.84 or 1.65 drive Installing a 4cyl means less power to spin prop that fast. The 4cyl would have a 1.98 The 1.98 woukd spin prop slower. So needs to reduce pitch to compensate
  17. alldodge

    Mercruiser out drive compatibility

    He is going from a 6 to 4 so the drive will be higher ratio
  18. alldodge

    Mercruiser out drive compatibility

    Remove drive and prop. Mark prop shaft and drive shaft (grease pencil or marker) With drive in forward or reverse rotate drive shaft 10 revolutions while also counting prop shaft rotations. Divide prop into drive Exp 10/5= 2.0 10/5.5= 1.81
  19. alldodge

    Bravo 1 to Bravo 3 Conversion

    Agree, yes they can swap, but check ratio of drives
  20. alldodge

    Mercruiser out drive compatibility

    Might be, need to look further No, would need to decrease pitch Might even think about not doing it depending on what boat it is. If the boat is heavy for a 6cyl then it will be a dog with a 4cyl, even with less pitch
View older results
Top