Search results

  1. jerryjerry05

    '88 Force 15 "Where's the thermostat?"

    You took it apart and didn't change it?(impeller) The vanes can look good but can be soft/weak and not pump enough water.
  2. jerryjerry05

    1990 force 90 hp trim pump kit?

    The FIRST thing: there is NOTHING inside the pump that you can fix "nothing" the thing that goes bad in those pumps is the seals in the very bottom. You happen to read the 2nd through the 5th posts in this forum? They're the best reading here in the Force Forum. They contain lots of tip and...
  3. jerryjerry05

    puzzled 88 85 hp has strong spark on number 2 cylinder and super weak spark on 1,3

    Thought I posted in here yesterday??????????? WHY??? did they remove my post??? Get a good spark tester.
  4. jerryjerry05

    '88 Force 15 "Where's the thermostat?"

    No thermo on the 88/15. The parts diagrams might show it has a place for it but I've never seen one in there.
  5. jerryjerry05

    puzzled 88 85 hp has strong spark on number 2 cylinder and super weak spark on 1,3

    What are you using to measure spark? Something like this works best.
  6. jerryjerry05

    Chrysler 75 hp 1975 Spacer plate?

    IF?? the pump is in good shape? it should pump enough water to cool 3 motors. Start it without the thermostat in and see how much water it pumps.
  7. jerryjerry05

    Fuel pours out of bottom cylinder (no 4)

    Check the diaphragm in the fuel pump.
  8. jerryjerry05

    Chrysler 75 hp 1975 Spacer plate?

    1988/89 Force did away with the pressure relief/ poppet valve. They found it would get stuck real easy and in salt water became useless real fast. It was located on the bottom of the block. Diamond shaped cover with 2 TINY screws holding it in place. They moved the pressure relief up in the...
  9. jerryjerry05

    1975 25HP thermostat

    The reason you can't find one is they made a place for one but didn't use one??? Lots of smaller Chrysler/Forces didn't use a thermostat.
  10. jerryjerry05

    Need Points information for Sea King 9.2hp

    Backfire: I have to ask, plug wires on the right plug? had to ask :)
  11. jerryjerry05

    1989 Force Gamefisher shift linkage adjustment

    You said: "getting a sort of a half-second slip and thump as if the clutch dog is periodically slipping." It's possible the dog is slipping?? Also test the prop hub for slipping, Remove the prop, scribe a line across the hub and reinstall and go for a ride. After a slip, check the scribed line...
  12. jerryjerry05

    Force 120 1976 - Was running great, then gradually lost ability to idle. - Need Help Please

    On the block under the coils/packs is a foundry stamp. The numbers in the middle of the circle is the year. Also under the bottom carb on the intake is another foundry stamp. Sometimes the starter will have a year on it(if it's original). The comp #s : that motor was designed to have a...
  13. jerryjerry05

    2006 VZ225TLR 2006 help?

    2006 225 good comp all 6 good spark. New low pressure pumps and new high pressure pump 60# Starts and when put in gear it diesels up and down fast about 1/2 second wave. Any ideas? Thanks
  14. jerryjerry05

    ox66 aftermarket high pressure fuel pumps

    Just bought a HP pump for $15 Lifetime warranty. Hooked it up and the pressure was 60# and seems OK Your pump 67H-13907 is more expensive but still under 40$ FUEL PUMP COMP. 67H-13907-00-00 673$ Put your part# in Ebay and the pumps available show up,
  15. jerryjerry05

    Force 120 1976 - Was running great, then gradually lost ability to idle. - Need Help Please

    Before you remove the head: get a snake camera for your phone and have a look at the cylinders or a long skinny screwdriver and turn the motor so the sd goes all the way in and see if you can feel any cuts or grooves in the walls. The spark plugs all burning the same or is #1 clean? Pics? How...
  16. jerryjerry05

    Force 120 1976 - Was running great, then gradually lost ability to idle. - Need Help Please

    I answered this in the post you hacked. Always start your own. The motor in the video is from a 120 Force about 1995 The coils /pack are a Mercury added part, they took over about 94 and used their parts. From the way the motor sounds it sounds like the carbs are set wrong, one running faster...
  17. jerryjerry05

    Force 120 1976 - Was running great, then gradually lost ability to idle. - Need Help Please

    The motor in the video is from a 120 Force about 1995 The coils /pack are a Mercury added part, they took over about 94 and used their parts. From the way the motor sounds it sounds like the carbs are set wrong, one running faster than the other. Loosen the tie bar and reset the butterflies to...
  18. jerryjerry05

    need starter for chrysler 70hp model 707hf availability

    1973 Spark test all cylinders? Compression test? Like the others suggested check the flywheel key. What ignition system do you have?
  19. jerryjerry05

    Chrysler 1981 55HP Possible CD problem

    You said: Was getting it ready for the water so was double checking the timing and that's how I noticed it as the timing light wouldn't show the markings as it warmed up. The Force/Chrysler timing marks: the timing is set at wide open throttle and not running. If you get it running and search...
  20. jerryjerry05

    Chrysler 907HB 90hp wiring color codes…

    The worst thing about the Chrysler/ Force is the gas economy. No where as good as the newer motors but not that bad. My neighbors 225 Evinrude cruising got about 2.1-2.3 mpg. My twin 88 85 usually around 2.3 mpg, not too bad. The newer EFI/DFI get a whole lot better. Friends 2007 200 Yam OX66...
Top