Search results

  1. Grub54891

    TV propane regulater

    Thats what I thought, thank's.
  2. Grub54891

    TV propane regulater

    My propane regulater on my 1977 Dodge motorette rv took a dump. I can rebuild it if I knew where to get a kit but, I haven't found one yet. Regardless, is this a high pressure regulater or low pressure? All it runs is the stove/oven, heater and water heater. It's presently got a Helco model...
  3. Grub54891

    Replace or

    From my perspective, those don't look flat. Flat would be Shiney all the way around, milled or sanded on a flat surface. Filing don't work that well in my experience. Besides, you have a thin spot so it's just a matter of time before it damages the motor.
  4. Grub54891

    Power outlet

    Build a campfire, put an old school prekulatr coffee pot in the fire and wait.
  5. Grub54891

    Frozen manual tilt

    You will have to dissasemble the tube, clean it up and re-grease and put together. On my 35hp the shifter has to be in fwd to tilt it up, any other place it is locked down.
  6. Grub54891

    New bearings: too much movement on spindle

    How about a pic of the offending brake. Sounds like a retainer is missing.
  7. Grub54891

    Ground Wire on EzLoader Trailer--Mystery

    I always run the ground wire directly to each light. No issues that way.
  8. Grub54891

    Refrigerator 1.9cu ac/dc

    Google Norcold. They still make them.
  9. Grub54891

    Trim issues

    The trim fluid will turn pink colors if there is air in it. You may have to check and fill after sitting for the air to settle out. When there is no mire air the oil will stay clear.
  10. Grub54891

    Propeller slipping for a while and then worked fine

    You can check the prop yourself. Make a mark on the hub, and prop. Run it till it slips. The marks will no longer line up. If you ran through weeds/muck you may have had a bunch of weeds on the prop making it seem like its slipping when its just the weeds causing that. Running hot could be...
  11. Grub54891

    3D Billboards

    Back to the future....
  12. Grub54891

    Refrigerator 1.9cu ac/dc

    Had one years ago like that. My brother connected the two wires at the control together in the morning, let it get as cold as possible then unhooked. Good for the day anyway, we sold it shortly after. A new controll would have been better.
  13. Grub54891

    Refinishing mohogany swim deck - what should I use?

    Thats different. Have a pic of it? I like teak oil as you don't have to sand and fix varnish all the time. Just a wipe with a rag and done.
  14. Grub54891

    Long Trip Home - Florida to Georgian Bay

    I use Verizon, monthly card is 40 bucks. Never let me down anywhere, and can make it a Hotspot.
  15. Grub54891

    Refinishing mohogany swim deck - what should I use?

    If its teak, you can use teak oil only. You have to re-apply it twice a season but it won't chip and flake off like a varnish would.
  16. Grub54891

    So, what did you do today?

    So is tounge oil durable/repairable? I gave to redo my oak flooring and want something that won't chip or wear as easily.
  17. Grub54891

    Cmc tilt and trim, Help

    On a side note, any splices you make should be heat shrink connections. This prevents corrosion at the joints. And wire nuts are not to be used on any boat per Abyc standards. I'm sure you didn't put them wire nuts on there, the po probably did. Hope you get it figured out!
  18. Grub54891

    water coming out carb

    First and foremost, what are we working on? There should be a model and serial number plate on the motor. Get us a bit more info and I'm sure others will chime in with ideas.
  19. Grub54891

    How long for water in an I/O to freeze?

    I've seen a tractor block freeze overnight and the temp only dropped from 50 degrees to 25 overnight. It warmed up to to 50 the next day but all the water was in the oil pan. Wasn't mine but the owner had just got it running from an overhaul and wanted to see it run.
  20. Grub54891

    2018 bentley 200 Fish - glove-box push button latch

    It's a bit hard to find an exact match. Boat builders get their hardware from the lowest bidder in bulk, and then move on to a different vendor. Usually you have to modify your existing panel to fit a new latch.
Top