Search results

  1. S

    1991 25hp evinrude starting issues

    Okay, and your letting it warm up before you play around with the low speed idle jet I assume. Other than components like reed valves and such it sounds fuel related. When you rebuilt the carb how bad was it inside? Did you clean every passage ways completely? In the carb throat at the top...
  2. S

    1991 25hp evinrude starting issues

    So what is the current exact issue? Will it start and idle fine? Put it in gear it dies? On the water or on muffs? Describe in detail and post a YouTube video.
  3. S

    2007 Mercury 90ELPT 4S cuts off shifting into Neutral

    Only thing I can think of is the nutruel locator switch in the control box is malfunctioning.
  4. S

    Difference between 1986 50hp and 60 hp 2 stroke carburetor?

    I didn't see a 60 by the way, 70 was the next one up.
  5. S

    Difference between 1986 50hp and 60 hp 2 stroke carburetor?

    Jets seem attainable but can't you use your old jets or are your carbs missing?
  6. S

    1991 25hp evinrude starting issues

    Yes, my 83 has that service bulletin but I figured by 91 it should have been fixed. Nothing to do with air really they just want the timing moved up before the carb starts to open. Before doing that on mine it would run but hesitate before taking off. Hope that works for you.
  7. S

    1994 40hp Johnson run

    Yes I hear it. A wire is sparking somewhere. Start it after dark. Probably why it's missing.
  8. S

    1991 25hp evinrude starting issues

    Have you looked at your primer system and is it working correctly? Not the primer ball. Are you letting it warm up properly? Maybe when it running, pull each spark plug wire off at a time and see if it dies..... You might be having a problem with one cylinder or something.
  9. S

    Evinrude 25202r WOT adjustment

    You know I'm not quite sure about your link and sync on that older motor. Maybe that one doesn't have that rod....my 77 does. Must have something. Your motor new was probably 140 psi and you would hope it to be no lower than 110ish. My 77 is at 125. Hopefully someone will come by and show...
  10. S

    1991 25hp evinrude starting issues

    Get one of these and set it to 1/2inch. Nice blue spark.
  11. S

    Evinrude 25202r WOT adjustment

    If the butterfly is perfectly flat when you twist it to full throttle while in gear than your carb is set correctly. You may want to check compression with another gauge just to be sure. Compression is low.
  12. S

    1991 25hp evinrude starting issues

    Define good spark. Idle jet setting?
  13. S

    98 Johnson leaking hydraulic fluid.

    Here's what your up against. Enjoy.
  14. S

    Evinrude 25202r WOT adjustment

    Not ex Not exactly sure on that year but what your describing is the proper way of adjusting the idle/timing which is done at the carb. The adjustment for wide open throttle is done under the flywheel on the port (left) side. There is a long rod with a set screw and that controls how far the...
  15. S

    98 Johnson leaking hydraulic fluid.

    Looks round to me so I don't understand.
  16. S

    98 Johnson leaking hydraulic fluid.

    They make a driver with longer bits at HF.
  17. S

    Remote throttle/shifter + steering for 15HP tiller steer

    Here is a video of how that works and a different one I've never seen.
  18. S

    Remote throttle/shifter + steering for 15HP tiller steer

    https://www.defender.com/product.jsp?id=1054937
  19. S

    Remote throttle/shifter + steering for 15HP tiller steer

    I believe it locks down once you have it adjusted but it's been a long time since I played with one. Had one years ago on a 25 HP Johnson.
  20. S

    Remote throttle/shifter + steering for 15HP tiller steer

    Here is a better picture of the concept.
Top