Search results

  1. dingbat

    SDS connector on Suzuki DF300 with "Fly by wire" Throttle, Shifting, Steering controls

    The CAN connection to the ECM is typically a small, square 4 pin connector with a cap like that displayed in the diagram Need a CAN sniffer or a interface module to collect the data
  2. dingbat

    Old motors DEMAND to be retired when they are 65 years old..

    Interesting conversation given the well documented increase in the life expectancy and reliability of vehicles manufactured today
  3. dingbat

    Gas cap retainer

    Goggle - gas cap tether replacement
  4. dingbat

    Honda 9.9 burning oil

    How does oil get from the combustion chamber to the air box? Compression numbers? Spark test? Complete disassembly and cleaning of the carbs? Checked timing?
  5. dingbat

    Trailer fit?

    You get the proper tongue weight then adjust bunks from there
  6. dingbat

    Honda 9.9 burning oil

    Oily for a properly tuned and operating 4 stroke Guessing the “smoke” is excess fuel. Either the carbs are out of adjustment or the ignition module is having issues
  7. dingbat

    Yard sale grinder

    What is a Sander? Sanders are designed for smoothing surfaces through abrasion, gently removing material from a surface. They do this by moving sanding discs, sandpaper sheets, or a sanding belt across the material's surface in either a circular or linear motion. What is a Grinder? Picture...
  8. dingbat

    Planning out installing NMEA 2k

    NMEA 2000 does not support radar. Not sure what connecting a stereo to NMEA buys you? All you really need is a NMEA2000 starter kit and a couple of extra drop cables and tees
  9. dingbat

    Planning out installing NMEA 2k

    Well, I would definitely install a backbone. Have both mfd networked sharing gps antenna, paddle speed and fuel flow monitoring.
  10. dingbat

    Suggestions on how to fill my onboard gas tank?

    I put the oil in the oil tank and fuel in the fuel tank. Mixes perfectly every time....lol
  11. dingbat

    Planning out installing NMEA 2k

    You can't share data between the units unless the two units are networked. I installed a GFS-10 fuel monitering system. Gives me real time fuel flow, digital fuel tank level indication, usage, DTE calculations, etc. Sounds good, but not as useful as you would think. Dug up your manual Looks...
  12. dingbat

    Planning out installing NMEA 2k

    No reason you can’t. The data fields should be fully configurable. I run one display full screen chart plotter and the other full screen sounder. Add things I want to monitor at the same time in the corners of each display. Created custom displays for fuel flow, water pressure, side scan...
  13. dingbat

    Planning out installing NMEA 2k

    Can't see giving up display space on a MFD to display engine data with SmartCraft gauge(s) already in place. As an automation guy, Active Trim sounds like a nightmare waiting to happen.
  14. dingbat

    GX1850

    I need to look at a doc I have at work, but I’m pretty sure NMEA 2000 is hot swappable. That being the case, it doesn’t matter when a node is powered up. A node will try to connect continuously until successful or times out. I suspect you have a power issue between vessel view and the NMEA...
  15. dingbat

    Fuel system

    Primer bulbs don’t get hard Can’t mount separator too high install clear piece of tubing in fuel line between primer bulb and fuel pump to check for a vacuum leak
  16. dingbat

    Planning out installing NMEA 2k

    Your existing gauges are “Smart Craft” so you currently have two network protocols available for use on the boat. You have “SimNet” to interface your plotters and radar and you have “Smart craft” to interface with the engine instrumentation. Not sure what introducing a third party protocol to...
  17. dingbat

    Bone headed move - put the plug in with 3M 4200

    Best to use a little bit of grease on the threads as a lubricate so the threads don’t gull. Tight wise, the seal is a tapered, interference fit. Hand tight until thread contact then a quarter to half a turn further to seal.
  18. dingbat

    Cost of a metal box to hold a large home generator.

    Wouldn’t want it galvanized….. Goggle “generator shed”
  19. dingbat

    Planning out installing NMEA 2k

    What are you trying to do? Just beware that manufacturers play games with their network communications. Their proprietary communications (sea Talk, Simnet, etc.) protocols typically support more and faster data transmission than NMEA 2000. I would use the proprietary communications unless you...
  20. dingbat

    Motor stops under power

    Installed with the arrows in the right direction? Holding the ball vertical while pumping?
Top