Search results

  1. tpenfield

    Replacing a fuel tank 1989 Baretta 200 success

    I did find a few 'Baretta' threads by doing a search directly here on iBoats (1984 restoration - the one you posted to - plus a few others). Looking at those threads, you probably already know what you may be up against (complete rebuild :unsure: ). Anyway, it looks like there is a small...
  2. tpenfield

    Replacing a fuel tank 1989 Baretta 200 success

    Welcome to iBoats . . . Based on a quick Google search there is not much out there for guidance. I see from web pictures that the boat has a carpeted floor. So, it would be a fair guess that there is not a hatch or anything that can be easily removed to access the fuel tank. Usually, there...
  3. tpenfield

    5.7L MerCruiser Bravo III under water...repairable?

    In terms of learning, this boat might be the Special Education section of the School of Hard Knocks. :eek: As the others have stated it looks like it had been sitting in the water in a neglected state for quite some time (months). Not sure if it was sunken the whole time (or not), but...
  4. tpenfield

    Digital Throttle/Shift (DTS) Shift Adjustment ???

    As I'm gaining familiarity with the joystick through use and testing, I am seeing that not only is there shifting consideration, but also engine RPM. I was using the joystick yesterday to spin the boat around and noticed that one engine was going faster than the other. My thoughts were due to...
  5. tpenfield

    1999 Bluewater Mirage Swim Deck

    Welcome to iBoats . . . Probably a needle in a haystack odds of finding one. Looks like it is made of Teak Wood? Time to hone up on your carpenter skills? :unsure: Maybe use Starboard (HDPE) 'boat board' as an alternative. If it is just the center piece missing, a tape measure can get you...
  6. tpenfield

    Chaparral Engine Compartment Insulation

    Welcome to iBoats. . . You could contact Chaparral, but the material is probably a common insulation used in marine applications. iBoats sells it . . . . . Is this for the engine compartment or elsewhere?
  7. tpenfield

    Guys, help with a weird fishbox on my new (to me) Robalo

    Is there a screen on the drain fitting in the 'fish box'? If not, then there may be a clog that cannot go out past the thru-hull fitting. You could try to force water (garden hose nozzle) in at the thru-hull fitting, or apply suction at the drain in the fish box.
  8. tpenfield

    Gauge making me crazy

    Your starboard exhaust manifold is 165. What about all the other parts of the engine? Top of elbow Recirculating pump hose Bottom of thermostat housing were it meets the intake manifold Water duct in the front of the intake manifold Any chance you are using a European sender and a USA gauge?
  9. tpenfield

    Gauge making me crazy

    There is an overheat alarm and it will use the obnoxious buzzer. See if you can find the 210˚ F somewhere around the engine. Make note of the temperatures at different spots. Where you are holding the IR gun in the picture is right where cold water comes in from the outdrive, so you are not...
  10. tpenfield

    Digital Throttle/Shift (DTS) Shift Adjustment ???

    Quick Update . . . It has been difficult to find some time to do some additional tests on the Axius Joystick the shifting. I did find some time today . . . I 'undressed' the engines so I could see the shift actuators in action. Both engines/actuators appear to have identical 'throws' of the...
  11. tpenfield

    1980 Gamefisher

    I found a parts list online that indicates water cooled. Maybe the OP can verify. I'd actually like to find an air-cooled 7.5 myself :LOL:
  12. tpenfield

    1980 Gamefisher

    Small outboards seem to have a mind of their own. Most problems are fuel delivery (carburetor) and cooling (impeller). I usually run a high concentration of curb/injector cleaner in the first tank after a layup (winter) to make sure the carb is not getting gummed up. Mercury Powertune (spray)...
  13. tpenfield

    Towing a boat with 9ft beam...

    Congrats on the new boat. (y) For future considerations, I would not be overly concerned about towing a wider boat, if you decide to go bigger in the future. It depends on how often you tow and what you are comfortable with. If you tow a lot, you can always get an annual permit. If you...
  14. tpenfield

    Quit My Job . . .

    Well, I got a job . . . :unsure: IT Consulting for one of the partner organizations where I used to work. Probably will be only 1 day/week, so I'll have plenty of time to work on my home and boat project lists :D
  15. tpenfield

    Britain’s Queen Elizabeth II Dies at 96

    Yes, she has really seen it all. Charles is 'in charge' now. :unsure:
  16. tpenfield

    Struggling with Gauge Temp

    Here is a typical exhaust stack, showing manifold, gaskets, (optional spacer block), and riser (aka elbow). The typical flow of water is noted by the arrows.
  17. tpenfield

    Struggling with Gauge Temp

    As for the exhaust manifolds, when the time comes. Take off the lower hose to let them drain. Then remove the bolts that hold the riser onto the manifold and pull the riser off. You will need new gaskets to re-assemble, so get those ahead of time.
  18. tpenfield

    Struggling with Gauge Temp

    You need to backflush the intake line (hose) not the engine block. You may end up replacing the impeller, so don't rule that out. The hose that is getting hot is the recirculating hose (orange). It sounds like not enough cool water is getting into the engine, because not enough hot water can...
  19. tpenfield

    Trim not work above 3000rpm (377Mag MPI DTS Axius)

    Yes, I doubled up on the accessory battery and the warnings went away. (actually connected the bank of 4 inverter batteries to the 1 accessory battery). It seems that part of the overall system is fed from the 'house' battery and not the starboard engine battery. I was also able to resolve...
  20. tpenfield

    Upgrading Gen 5 VP V8-300 (300HP) to a V8-350 (350 HP)

    Surprising that Regal puts the 300 (or even the 350) HP engine in that boat. Definitely could use 400+ HP. Many 28 footers have twins for good reason.
Top