Search results

  1. brim_buster

    1956 Scott Atwater Driveshaft

    Thats all the service manual has
  2. brim_buster

    1956 Scott Atwater Driveshaft

    heres another
  3. brim_buster

    1956 Scott Atwater Driveshaft

    this is one pic from the manual
  4. brim_buster

    Sears Ted Wiliams

    https://www.ebay.com/itm/402289748820?hash=item5daa566b54:g:5pkAAOSw9TRfm4pf
  5. brim_buster

    1956 Scott Atwater Driveshaft

    Ok so we have a 1956 Scott. Do you have a HP or serial or model number to go with that. In 1956 Scott Atwater was making different motors for different companies so this is much needed info. I have the service manual and Im trying to help you figure this out. Need more info
  6. brim_buster

    1954-1955 Elgin 7 1/2 HP

    There are a ton of Elgin parts on Ebay. I saw this didnt know if that was what you were looking for
  7. brim_buster

    1954-1955 Elgin 7 1/2 HP

    https://www.ebay.com/itm/174658242912?hash=item28aa714960:g:KK8AAOSwbHpf6mod
  8. brim_buster

    Gamefisher 5hp water pump question

    Its a Force motor and. Its a 1998 long shaft 5 hp. If you see water spraying out the exhaust ports your good. Check ebay for the impeller they are cheap.
  9. brim_buster

    2006 DF250 no high RPM power

    what kind of prop does it have?
  10. brim_buster

    Fleet Scott 14.1

    Looks like the same setup on my Firestone and I used OMC coils I had in the shop. Worked great
  11. brim_buster

    Save or part out?

    Id restore it all day. Probably run like a champ but Id first check compression to see if its an anchor or boat motor. Coils will be the easiest and it looks like the fuel pump is below the starter. I know some had electric pumps.
  12. brim_buster

    1953 Hiawatha 5hp

    80 psi or better
  13. brim_buster

    Clinton MW 7hp M/N: K700 2107A oil drip

    Look at your private messages. I sent you one
  14. brim_buster

    Vintage clinton 7 HP no fire

    someone didnt have 10 bucks in their pocket. And your right thats a No No
  15. brim_buster

    Gamefisher 7.5 too much air

    Yes sir
  16. brim_buster

    Vintage clinton 7 HP no fire

    80 psi aint bad Ive run them on that and they still run today. Doesnt hurt to look any way. 25 psi is a different story. Let me know what you find out
  17. brim_buster

    Vintage clinton 7 HP no fire

  18. brim_buster

    Vintage clinton 7 HP no fire

    My question is what kind of fuel supply are you using. Im assuming a tank with primer ball? I always put a small fuel filter in-line so I watch to see if fuel is moving. Next question is and its a stupid one. Is the float working and not allowing fuel into the bowl? Look at these 2 pictures...
  19. brim_buster

    Coil needed for 1947 Firestone 3.5 hp

    I think I took an OMC one and did that but dont remember if it was my Firestone. Here is yours which looks really similar to my 7.5
  20. brim_buster

    Gamefisher 7.5 too much air

    The pump bladder has to be set at 2 oclock. Just like the picture. It has to be close to dead on as possible. Other than that they arent really that fast to accelerate. Its just a lawn mower engine built to get you where you need to go and back. Your not gonna pull a tube or a skier with it LOL
Top