Search results

  1. brim_buster

    Gamefisher 7.5 too much air

    With choke half closed you are cutting off air and making it run richer. Not getting too much air not getting enough fuel. Are you using an external fuel tank or the one on the motor? Add an inline small fuel filter to see if in fact you are getting a good fuel flow. Im gonna assume good...
  2. brim_buster

    Gamefisher 7.5 too much air

    Did you replace the fuel pump bladder inside the face of the carb and its seated with the slit at 2-8 oclock? Like in the first pic I sent.
  3. brim_buster

    Gamefisher 7.5 too much air

  4. brim_buster

    Gamefisher 7.5 too much air

    very simple carbs. How did the fuel pump look? Does your carb have a high speed adjustment screw in the bottom of the carb bowl? How did the reeds look? Did you adjust the float properly?
  5. brim_buster

    Old Sears 4.5hp outboard

    missing the fuel pump bladder
  6. brim_buster

    74 5hp eska carb venting issue

    Check your fuel pump bladder for a crack
  7. brim_buster

    74 5hp eska carb venting issue

    what are you calling a vent?
  8. brim_buster

    9 hp ted williams

    I sent you a message about the manual
  9. brim_buster

    Ted Williams 3 or 5 hp ?

    1971 3hp
  10. brim_buster

    1954 Gale buccaneer

    3 things, either water tube not installed correctly or clogged or impellor put in wrong
  11. brim_buster

    Ted Williams 5.5hp - Internal tank fuel line

    nice small one that will fit that hose size
  12. brim_buster

    Ted Williams 5.5hp - Internal tank fuel line

    Inline fuel filter was there. Someone was smart enough to add it so trash from the tank didnt get in the carb
  13. brim_buster

    1956 Goodyear Sea Bee questions

    I sent you a private message about a manual with part #
  14. brim_buster

    1971 Tecumseh AV750

    Tecumseh has them. They have a website and all your Eska made outboards in early 70s used them on their 7hp motor.
  15. brim_buster

    Sea King

    you have a pic you can post?
  16. brim_buster

    6hp merc electric start

    I have in the shop a Merc 6hp electric start with a serial number 5122282 and cant find any info as far as year so I can order parts. Can someone please help. Made in Wisconsin
  17. brim_buster

    SCOTT ATWATER IGNITION COILS

    https://www.repco.com.au/en/parts-service/fuel-ignition-exhaust/ignition-coils-modules/c/1862918217?q=%3Arelevance%3ApartSlot%3AIGNITION%2BCOIL%3A1862918217%2F1374563120%3ATransformer&text=#
  18. brim_buster

    1947 Firestone 3.5hp no spark, wont start

    Ohm test that coil Guaranteed its shot. Im almost sure you can go buy a OMC coil and pull the winding off and swap it to that old one. You can you tube or google how to do it
  19. brim_buster

    Firestone 1947 3.5hp flywheel question

    I have on newer motors left the nut on about a couple threads and hit with a rubber mallet and it pops off. Not saying it works all the time but it has. I would run to Harbor freight and get a puller on a motor that old.
  20. brim_buster

    game fisher 15 hp

    Right above the cavitation plate will be a cover with 2 screws. Take it off to access the shift linkage and remove the piece holding the 2 pieces together.
Top