Search results

  1. The Force power

    1998 Force 90hp 2 stroke is it bad?

    Define cheap gas. lol
  2. The Force power

    1990 Force L-Drive 90hp -- Can't get it to idle -- losing my mind :D

    I'm glad it finally "works" for you, it sure was a journey!
  3. The Force power

    1998 Force 90hp 2 stroke is it bad?

    The only advice I could add to it; The price is important!! That Force has the latest update('96) Flywheel / Ignition By Mercury (if the price is right/decent shape, I buy it without hesitation)
  4. The Force power

    Sparkplug reading

    Hi raceone, Thanks for tuning in, what would be the reason for the different on each plug? (meaning more carbon build-up one more then the other) Normally I would check the compression but I'm getting 5600 rpms alone in the boat and 5000+ with two and towing a tube so I'm not too concerned about...
  5. The Force power

    Sparkplug reading

    Hi jerry, Thanks for chiming in, The reason I asked is because I parked my boat boat for the season at camp (Ontario, Canada) and pulled the LU for milky oil but that's another story - The Set-screws are all set at 1 turn out and she's been running flawless for 3 years on it. - I don't do much...
  6. The Force power

    Sparkplug reading

    These are out of '90 Force 90 HP The bottom (#3) Sparkplug has more carbon built-up then these others, could the be caused by the recirculation-hoses to #3 getting plugged OR intermitted spark?
  7. The Force power

    Tilt-n-trim electrical

    Just throw it back in the kitchen drawer & blame the kids
  8. The Force power

    Force 125 1986, hole in front of lower unit weeping oil

    you mean the one for the force correct?
  9. The Force power

    Force 125 1986, hole in front of lower unit weeping oil

    you could try this? It may work?? Mercury 85552 BOOT
  10. The Force power

    Force 125 1986, hole in front of lower unit weeping oil

    I would have to check my manual again to see how many turns out from fully seated the correct position is. The Bigger issue now; you will have to do a tear down to get the shaft screwed into the connector (unless your are the luckiest guy in the world) Yes, it would change the length of the...
  11. The Force power

    Force 125 1986, hole in front of lower unit weeping oil

    I don't understand why I see tread on the shift shaft? The rubber seal could be stuck up in there as there with amount of grease showing although I cant really see it in the pic.
  12. The Force power

    Force 125 1986, hole in front of lower unit weeping oil

    I made mine out of fittings of old handpumps to fill the gear oil into the lower-units. one for pressurizing & one attached to a gauge RATED for low-pressures ONLY (for accuracy ) while pressurized (no need for more then 10 psi) turn drive & prop shaft move the shift-shaft up/down multiple time...
  13. The Force power

    Post your performance numbers

    why do you let it scream to 6000?
  14. The Force power

    Force 125 1986, hole in front of lower unit weeping oil

    Get a manual it will be your best investment ever! google seal kits or check the shop on this site for a complete kit as long as the both have two piece shafts then yes they are interchangeable
  15. The Force power

    Post your performance numbers

    lol why knot; Engine: 1990 Force 90hp Prop: 17P alu, no cup Boat: 18' Bayliner bowrider with lots of water in foam factory weight + ? lbs Top Speed & RPMs: 33-36 mph @5500rpms GPS / on gauge 45 mph. Load: one adult Gas mileage: not bad at all
  16. The Force power

    Another Guy With Force 120 Issue

    gasket maker 518 permatex
  17. The Force power

    1987 force 125 cooling lowdown

    the pick/up tube may not be insert into the top housing of the pump
  18. The Force power

    Force 125 (1987) shift pivot screw leaking

    If you want to go that route? I would NOT pull out the screw completely but far enough so I can slide the O ring over the head and pray it works. pressurize to 5 psi and check for leaks then fill the cavity with silicone
  19. The Force power

    Low Compression on Cylinder #2

    The Rooster
  20. The Force power

    Force 1989 125 question

    seem to line up with schematic
Top