Search results

  1. M

    Has anyone used this stuff

    Someone mentioned Fasco products in another thread so I took a look at their catalog and saw this. https://fascoepoxies.com/Fasco-99-Stop-Rot-Epoxy.html Sounds interesting especially since lot of guys have to rebuild their transoms due to water intrusion and rot. I was wondering if anyone...
  2. M

    Fender for Shorelander trailer

    google search is your answer.
  3. M

    Boat winterized and summarized each year but not used in 5 years

    I agree 100%
  4. M

    Best technique for waterproof solders?

    I meant rosin core, thanks spell check.
  5. M

    Best technique for waterproof solders?

    They probably assume that one knows you don't use acid flux on this type of job, save that for metal radiators. Also It's easier to use resin core solder then you don't have to worry about applying the flux.
  6. M

    Service Batteries - run out of charge

    Look all over the batteries to see if there are any letters or numbers/date burnt into the plastic case, as with tires there may be a date code. Sometimes there's a sticker with the date on it. Depending on where you are many auto parts stores load test batteries too.
  7. M

    Service Batteries - run out of charge

    As dingbat said, the batteries need to be load tested. You don't charge a battery and measure the voltage then say they're good. Also waiting to hear the age and size of the batteries. Are they wet cell? If so have you checked the water level?
  8. M

    Best technique for waterproof solders?

    First, try to minimize the number of splices. Use butt connectors instead of twisting wires. Slide a piece of heat shrink tubing over the wire. Crimp butt connector then cover with liquid tape and let it dry. Put heat shrink tubing over the butt splice heat it then cover with more liquid tape.
  9. M

    Electric Boats

    Keep us posted on your progress. I built a pv solar system for my house with battery backup 20 years ago and with several upgrades it's still in service. This will be an interesting project to follow.
  10. M

    1975 EZLOADER TRAILER

    Look online for a standard basic trailer wiring diagram, they're nothing special.
  11. M

    Water Flow

    How was the water pressure before you replaced the impeller? Are you able to run the motor in a tank of water instead of the muffs?
  12. M

    Fuses on a 1986 four winns.

    If something doesn't power up the fuse may be blown. If the fuses aren't labeled turn all of the accessories on then pull one fuse at a time and see what turns off then label it.
  13. M

    (1987) 70 HP yamaha 2 stroke won't stay running, slowly goes to idle

    If you're trying to decide on buying the motor or not, I would say not.
  14. M

    GARMIN FISH FINDER & UNIDEN RADIO WILL NOT TURN ON PLEASE HELP!!!

    Not that this will fix your issue but I would also have ring terminals on all of the wires. Have you checked the fuses? You wouldn't be located in newport beach ca. would you?
  15. M

    alarm when turn the key on

    Do a search here on iboats if you can't find what you need try sim yamaha.
  16. M

    Yamaha F90 no water at telltail

    If you sucked in a lot of sand it may have damaged the impeller. Do you have an air compressor? If so blow air thru the water tubes.
  17. M

    alarm when turn the key on

    Are you absolutely positive you connected everything correctly? I had the same motor years ago before I re powered to a 4 stroke. The alarm will sound for low oil or high temp. Do you really need to remove the oil tank just to check the oil level? The sub tank is in the bilge and main tank under...
  18. M

    Wash down pump 2006 Angler 220 V FX

    Basically wherever you have room to mount it, run power to it and have room for the hose.
  19. M

    Yamaha F90 no water at telltail

    After you confirm the pisser tube is clear drop the lower unit to check the impeller.
  20. M

    Sanpan Pontoon Electrical Issue

    You're right, you have a loose connection. Start tracing and pulling on wires.
Top