Search results

  1. Bondo

    1988 Lowe Pontoon Evinrude 24 ft

    Ayuh,..... Welcome Aboard,..... Helms wear, just like cables, which is why they're usually replaced as a "Kit",......
  2. Bondo

    Steering

    Ayuh,..... Welcome Aboard,...... In that case, it depends on the motor yer puttin' on it,...... If the motor has a hollow tilt tube, you can use the push/ pull cable,..... If it's to old, ya might need the long cables, 'n 4 pulley system,.....
  3. Bondo

    Volvo AQ231A block Casting Number

    Ayuh,..... The vintages of the blocks is all ya need to know,..... Year for year, the 305, 'n 350 are completely interchangeable,.....
  4. Bondo

    Finding the right starter for my 7.4 mercruiser

    Ayuh,..... Welcome Aboard,...... If you don;t need that terminal, just leave it empty,.....
  5. Bondo

    Volvo penta 3.0

    Ayuh,.... Welcome Aboard,..... I've seen motors run just fine for many years, bubblegummed back together,..... So long as the water ain't gettin' into the oil,......
  6. Bondo

    Aq271c engine oil

    Ayuh,..... No problem,.....
  7. Bondo

    5.0l vs 5.7l

    Ayuh,..... Sure will,...... Ya know, it ain't as simple as swappin' the crank, 'n guts from the burnt block, into another bare block,.....
  8. Bondo

    5.0l vs 5.7l

    Ayuh,..... Both that head, 'n that block are junk,.....
  9. Bondo

    Mercruiser 7.4 Starter Grinding/Partial Engagement?

    Ayuh,...... Try it with the new, shorter bolts,......
  10. Bondo

    4.3L OMC leaking water.

    Ayuh,..... Welcome Aboard,...... It could be a cracked block, But,.... There's a core plug, right behind the motor mount too,...... If the core plug popped out, that means it froze, 'n the block maybe, or maybe not cracked,.... Further investigation is necessary,.....
  11. Bondo

    1998 Mercruiser 5.0 running problem - Camshaft???

    Ayuh,..... Yer motor should be a roller cam, so no,..... What is the color of the spark plugs,..??
  12. Bondo

    Mercruiser outdrive gear ratios

    Ayuh,..... Welcome Aboard,..... What rpms were you seein' at Wot,..?? That's a very small difference,.... Where the rpms come in will determine whether different props are necessary,....
  13. Bondo

    Mercruiser 7.4 Starter Grinding/Partial Engagement?

    Ayuh,..... Those are both pmm starters,.... Are ya usin' bolts that came with the starters, or the bolts that were in the motor,..?? These new style starters use a slightly shorter bolt, by 'bout a 1/4" or so,..... Shimmin' a chevy starter, moves it away from the flywheel, not closer,.....
  14. Bondo

    Channel Lock Stuck In Distributor?

    Ayuh,..... I donno, 'n never spoke to anybody that knows,...... It ain't like it could go anywhere,..... I don't glue 'em back in, 'n never had a problem,......
  15. Bondo

    Sx-m bearing cover with stripped dipstick hole

    I donno 'bout the Volvo dipstick, but the industry standard for drive oil plugs is 3/8-16,...
  16. Bondo

    Channel Lock Stuck In Distributor?

    Ayuh,..... That's impossible,...... Look closer,.....
  17. Bondo

    proper set up for twin I/O tie bar

    Ayuh,..... You want 1/16" to 1/8" toe-in, measured at the propshafts,.... It'll negate any slop in the steerin' linkages,.....
  18. Bondo

    Old 302 head job

    Ayuh,..... One thread, in one forum, per problem,.......
  19. Bondo

    Mercruiser 140 barely running and running rough

    Ayuh,...... The needle valve is leakin', not stoppin' the fuel pumps flow,.... Probably got plugged passages in the idle/ low speed circuits,.....
  20. Bondo

    Mercruiser 140 barely running and running rough

    Ayuh,...... Sounds like it's time to do it again,...... I believe you'll find that, that hole is the bowl vent,.....
Top