Search results

  1. 9

    2014 20 hp overheat sensor?

    seems like this would be a lot easier if the people posting about a motor would include the complete make and model info of the motor they are asking about in the original post
  2. 9

    2014 20 hp overheat sensor?

    and it seems we have no idea what motor you have since you did not tell us If you stop water flow a motor heats up quickly never heard of a water flow sensor before, but have heard of water level in older Zuks. they might even still have them
  3. 9

    Rusted spark plug well/mating surface - is this a concern?

    big question is why is saltwater getting onto the plugs while in the motor while running
  4. 9

    Quick wiring question

    some motors had A/C power generated for lights. they did not have a rectifier/regulator, but you can add that and a battery if you wanted
  5. 9

    Correct Sparkplug 2000 200hp Saltwaterseries 2 stroke

    the complete model # usually just because someone says it is a 2000 does not always mean it is a 2000, seen that many times on here
  6. 9

    Correct Sparkplug 2000 200hp Saltwaterseries 2 stroke

    so, you do not know what motor you actually have? hard for anyone to respond to a question we have no idea what model it is
  7. 9

    Yamaha 2005 F30 Issue

    Must have been a bad connection at battery to affect T&T and start
  8. 9

    Yamaha 115 4 stroke bad fuel pump canister electrical connector. Need connector. Cant find.

    I had forgot the name of that place, I need to bookmark it again
  9. 9

    yamaha engine slowed down

    test the buzzer and gauges to make sure they work when low oil or high temp happens
  10. 9

    Any lower unit experts?

    being rental, there is no telling what someone could have done to that unit
  11. 9

    Any lower unit experts?

    need to tear it apart to see if something came apart in the bearings or other stuff maybe, and got into the gears I guess a tooth on a gear could of popped off, but that would not be likely
  12. 9

    DT65 WONT REV FULL

    do you have a tach? RPM is a good thing to be able to see, so you know what it is doing not just guessing has it ever run well with that prop and load? cleaning carbs is not just blowing them out. Do you know if that motor and boat load along with the prop the correct ones for what you have...
  13. 9

    2000 200hp Saltwater series smoking more than usual

    the service manual for your motor will have a procedure to checking oil delivery and proper adjustment of the rod to oil pump
  14. 9

    new to Yamaha, tnt interchange question

    let us know how it works out for you mounting that power tilt assembly. that is what I read it was when I did a search for that part number. nothing about a tilt and trim
  15. 9

    new to Yamaha, tnt interchange question

    I do not even see a ELJ listed, but guessing it is an electric start, manual tilt. so what T&T unit did you order to mount on that motor? I would also guess, it will not bolt to a manual tilt motor
  16. 9

    new to Yamaha, tnt interchange question

    OP maybe not happy with a unit he cannot trim up underway, if he can get what he ordered to fit on his motor. maybe he ordered a T&T unit, we do not even know what motor he has or what he ordered
  17. 9

    new to Yamaha, tnt interchange question

    did they make a trim only unit? I remember hearing about tilt only with no trim you could not adjust the motor under way, it did not have the power to overcome the thrust of the prop pushing against the motor to move it to properly trim the motor P = Power Tilt/ Electric Start T = Power Trim...
  18. 9

    new to Yamaha, tnt interchange question

    I would go for an aftermarket one instead. changing out major parts on a very old motor would not be easy
  19. 9

    Continuous alarm in neutral - 2013 Yamaha T50

    I wrote in your other thread, I thought 4 stroke oil pressure alarm was for out of range for the RPM it was running at on some motors, could be wrong, but too high or too low of a pressure might cause an alarm monitor the oil pressure
  20. 9

    Boat slow

    is there a way to drain the bilge? maybe it has taken in water that is trapped down there making it heavy,since you have rotten wood down there
Top