Search results

  1. 9

    Year ?

    4th month of 2005
  2. 9

    Burnt fuel pooling?

    looks to me that hole is above the fuel bowl level, so fuel should not be that high. might check the float and needle and seat to see why it is over filling
  3. 9

    Suzuki lower units

    might check to see if there are any aftermarket ones out there
  4. 9

    Yamaha lf200 four strokes not planing out

    did they hook the motors to a laptop with the proper software to look at everything?
  5. 9

    Yamaha 90TRL propeller issue

    thanks, make sure you use a pin that will not rust away this time
  6. 9

    Yamaha F100 seized

    I would have to say water was inside the motor. how come the poster did not mention draining water and oil out?
  7. 9

    water in lower cylinder/ Corrosion issues

    how does a gasket fix the hole in the combustion chamber?
  8. 9

    water in lower cylinder/ Corrosion issues

    see if you can find another head, or see if someone can patch it those other holes look like they may be there on purpose
  9. 9

    Yamaha 90TRL propeller issue

    that is good news. how did you shear off the ends of the cotter pin with the nut in the way?
  10. 9

    Suzuki DT 65 outboard 1992 can’t get lower unit in neutral after water impeller change

    I am not familiar with that Suzuki, but would guess the lower unit may need to be opened up to get the shaft back into place
  11. 9

    Two wildly different compression readings, why? On in around 60 and on around 200?

    I would want to know if this motor is an interference motor, (if timing is off will the pistons hit the valves and bend / break things)
  12. 9

    Burnt fuel pooling?

    sorry, just notice he said burnt fuel and oil, not unburned. so that burned fuel and oil comes out the exhaust
  13. 9

    Suzuki 9.9 water restriction?

    2 people have given this motor away, so you need to take things apart to try and see where that water is coming form. maybe bad tube or grommet it sticks into, or a hole in some other part of motor
  14. 9

    She wont run over 3000RPM

    does the rail pressure stay in spec? if so, send the injectors out for testing and cleaning
  15. 9

    what causes an overheat alarm when the engine is not overheating

    pulling and testing the sensors, and measuring the temps at the sensors location might give you a clue if there is an overheat condition or not
  16. 9

    Burnt fuel pooling?

    over oiling maybe or one or more cylinders not burning fuel properly
  17. 9

    70ETLH thrust washer wear

    torque the nut properly and go
  18. 9

    Water and Exhaust Coming from Lower Cowling

    My guess is hole in exhust guide or gasker bad
  19. 9

    2004 Yamaha T50 TLRC Internal Corrosion

    are you saying that the freshwater lake he runs the motor in is likely outside the PH of 4-8?
  20. 9

    2004 Yamaha T50 TLRC Internal Corrosion

    maybe I need more chemical training, because I do not see how hard water deposits would eat the aluminum away
Top