Search results

  1. 9

    1992 Outboard 40hp C40ELRQ / timing question TDC / ATDC / BTDC setting

    you might want to clarify what you question is about. My C40TLRX specs are 7 ATDC and 25 BTDC so I would think yours would be also
  2. 9

    Two wildly different compression readings, why? On in around 60 and on around 200?

    run a leak down test to see where the air goes
  3. 9

    Yamaha 225hp ox66 tilt and trim help

    slowly sinking in
  4. 9

    Yamaha 225hp ox66 tilt and trim help

    sorry confused it with another thread saying relay clicked. if relay does not click then yes it is in the control side
  5. 9

    Yamaha 225hp ox66 tilt and trim help

    there is no fuse on the power to the T&T motor, yes there might be on the control part, but not on the main power. the relay is making noise (picking up) so the controls are fine I would guess it is on the negative side, but that is just my thoughts without testing anything. do you have a...
  6. 9

    Suzuki DF115 transom (Trim/Tilt) saver??

    It is a shame they went away
  7. 9

    8MLHU limited RPM

    So, you have not used a timing light and are just guessing the timing is good/in spec. most motors on sail boats are high thrust motors. they cannot get the boat moving fast they have different gearing to help the motor push high trust props good chance it is overloaded with the prop you have...
  8. 9

    Suzuki DF115 transom (Trim/Tilt) saver??

    what motor is this that has 2 different devices made on it for locking the motor up maintenance and trailering? a pic is worth a thousand words
  9. 9

    Suzuki DF115 transom (Trim/Tilt) saver??

    if you read your owner's manual it says that is not for trailering, only for locking the motor in the up position while doing maintenance
  10. 9

    8MLHU limited RPM

    is the timing advancing as it should. timing light should show what the timing is doing
  11. 9

    Stalling

    why does it not start with all plugs in place? no spark, motor will not spin over, or something else
  12. 9

    2001 Suzuki 4 Stroke Controls

    It may help if you said what motor you are talking about, but maybe not since it is the controller you are talking about I have no info on Zuke controllers
  13. 9

    2004 Yamaha HPDI

    this makes me wonder how many different HPDI motors Yamaha made in 2004
  14. 9

    How to operate side mount throttle for 1993 Yamaha jet?

    normally those control boxes would be turned around and mounted on the right side of the boat, so when you have a hold of it with your right hand you could operate the tilt and trim button with you thumb
  15. 9

    Timing and synchronizing a 1988 v4 130 hp 2 stroke. Need help.

    are you sure the spark is not going away when you set to normal or close to normal timing? just thinking wiring moved a certain way ends up killing spark maybe. there is a key, I guess it could be sheared But, TDC on pistions and marks on flywheel line up it should be good.
  16. 9

    Timing and synchronizing a 1988 v4 130 hp 2 stroke. Need help.

    I did not read anything about using the choke while trying to start. but raising the fast idle lever not only opens the throttle to allow more air in, it also may change the timing some also like you wrote. Could there be too much fuel to air for the cylinders to fire? do the plugs have spark...
  17. 9

    How to operate side mount throttle for 1993 Yamaha jet?

    the one on my 703 has a red part on the underside of the Tee handle that you squeeze to lift up so you can move the handle out of neutral to forward or reverse. is that what you are asking about?
  18. 9

    09 HPDI 225 3K RPM's in Forward

    switch, adjustment, or wiring maybe the softwear will be able to tell what is or is not happening. need to know the rail pressure is in spec also. takes more fuel to make it go when loaded up in forward in the water, but that should not drop cylinders unless injectors are not doing what they...
  19. 9

    09 HPDI 225 3K RPM's in Forward

    motor probably thinks it is still in neutral when in forward
  20. 9

    1988 70hp yamaha trim motor

    why? brushes get in the way? then buy a new aftermarket one, make sure you paint it well before installing if you are around saltwater
Top