Search results

  1. 9

    Torn Rubber On Shift Cam Assembly Question

    Have you drained the lower unit lately to make sure there is no water in there? to me it seems the level should not be that high. where is the level plug in comparison to that boot? you may have water in the bottom causing the level to rise
  2. 9

    2003 lx225 OX66 knocking sound

    sounds to me like you cannot get the RPMS up due to VST running out of fuel if the motor will get up with no load on it. takes more fuel under a load. does it help any when pumping the primmer bulb? or turn the key off as soon as the motor dies and then drain the VST to see how much fuel comes out
  3. 9

    Torn Rubber On Shift Cam Assembly Question

    is it oil or gear lub? smell it to see if it stinks like gear lub. replacement would be in order for mine
  4. 9

    cant find out the year of 90hp yamaha

    then follow Boscoes recommendations on numbers on parts and report back what you find, I am sure he can help with those even if you techs said they could not
  5. 9

    Remote fuel tank for DF140

    outboard motors have lift pumps to bring the fuel to the motor
  6. 9

    Bogging down.

    I am not very familiar with that 4-stroke motor, but timing advancement and additional fuel is needed when load is applied. since you replaced the carb, I would be monitoring the timing to make sure it is in spec and advancing as it should
  7. 9

    1991 Yamaha 25mshp 2 Stroke Emergency Signal Light

    so it does sound like you shredded a water pump impellor, hope you found all of the pieces and they are not blocking cooing passages inside the motor. Yamaha does not monitor oil and water pressure or flow, just oil level and water/motor temp as far as manuals go look for the manuals part...
  8. 9

    1991 Yamaha 25mshp 2 Stroke Emergency Signal Light

    when talking about impellor, the water pump comes to mind, not a fuel pump. fuel pump should be a diaphragm pump I would think the owners manual would have that type of info (Lights)
  9. 9

    Yamaha 85 shifting issue

    admit it you were wrong about his linkage, that is misleading. maybe he knew you were wrong and knew the rods were not threaded, and did not feel like calling you out on not knowing what you were talking about, But it could confuse others when looking for help
  10. 9

    Is there anyone on here with experience rebuilding Yamaha 2 strokes?

    I am sure there are plenty of people that have rebuilt 2 strokes to some extent. why are you asking, and how far into them are you needing answers to?
  11. 9

    1995 Yamaha C75 cowl compatibility

    I am thinking Boscoe would give a good explanation of that that number difference could be here is where I found that 95 https://www.boats.net/product/yamaha/688-42610-30-4D?ref=1256d9fc03fc0b1d150435174ae68f4351ae3831
  12. 9

    1995 Yamaha C75 cowl compatibility

    I see a listing for a 1996 C75TLRU and a 1995 C75TLRT I see the 94 and 95 c75 and C85 shared the top cowling part number 688-42610-30-4D the 96 C85 and C75 shows 688-42610-31-4D So Boscoe should that fit?
  13. 9

    1995 Yamaha C75 cowl compatibility

    I would look up the part numbers to see if they matched
  14. 9

    Yamaha 85 shifting issue

    I tend to agree with Lake, why post about a motor you do not know about and then come back to bash someone that points out you were wrong. you should have posted back that you were sorry you stated something wrong to the OP on how his motor operates and will try harder to make sure from now on
  15. 9

    Yamaha 85 shifting issue

    just to add, I have run into twisted and bent shafts and pins that caused this type of problem after someone tried to force a motor shift while not running or turning the prop
  16. 9

    cant find out the year of 90hp yamaha

    All is good, I never played with or worked on Yams until I picked up my 99 C40 in 2008. been helping relatives and friends with them since then. service manuals and common sense comes in handy for all make and models of motors. I am one of those that needs to understand how things work, so I...
  17. 9

    cant find out the year of 90hp yamaha

    I copied and posted up his original post about not having those to look at. go back and read the original post #1 seems you never did
  18. 9

    cant find out the year of 90hp yamaha

    exactly how did your posts do anything to help the OP, since he said his motor does not have the bracket stickers you were telling him to look at?
  19. 9

    2003 lx225 OX66 knocking sound

    wrist pin or lower rod bearing maybe
  20. 9

    cant find out the year of 90hp yamaha

    Just think how all of this posting about letters on the lower right of the tag has helped the OP that said "the boat is a 88 . cant find any tags on the motor to identify it. the two plates on the bracket are not there. is there a hidden spot on the engine to help me identify it ?" Boscoe has...
Top