Maybe, but a PS cooler has larger openings then a oil cooler, but something may have gotten in there which caused the restriction. If it did restrict water for even a few seconds the raw water pump impeller could be burnt and no longer pump
Special Note
Number 1 can be anywhere on the distributor
Bring up number 1 cylinder to TDC and where ever the rotor points is No 1 position. If someone wants it to be somewhere else, all they do is pick the dizzy up, rotate a bit, and sit back down. The key is the firing order
This is your cooling system
Has a 4 port thermostat housing
Note how the thermostat and pieces are installed. If done incorrectly it could be bypassing.
That said since it only leaks when in the water, it's most likely a transom issue. Could be soft or something not installed correctly
Get a short piece of clear hose from the hardware store, along with a double barbed fitting and hose clamps.
Place the clear hose at the thermostat housing and hose coming from pump. See if you see bubbles
The only time a Mod locks a thread is if it's older then 90 days and someone other than the originator post to it. If it does get lock, just select the "report" button and all mods will see it
Look forward to your thread
No need for long ropes, the float bollards float with the boats. Up/down makes no difference. Wear your life jacket, listen for the lock master and have at it
No issue with mussels or carp, if they make it down they will make it up
I've locked thru McAlpine many times over the years. Spent most my time on the lower side (Greenwood Ramp). Lot less traffic and more time to hook up with other boats and just float down the river
I forget but he is reasonable, had mine done a couple years ago before I sold the cruiser
mail
articfriends@yahoo.com
phone_alt
989 213-7361
•Work
maps
3241 Bradleyville Rd
Vassar, MI 48768
I would try to get it out but if unable to I would start it
There is no such thing as rebuilt injectors in the marine world. Just look at the injector it has a steel casing and someone is going to unpress (if that is a word) the casing. Remove all the parts, clean replace components, not going...
