Search results

  1. dingbat

    rectifier

    The regulator sheds excess current as heat. Make sure the wiring from the output of the regulator to the battery isn't compromised in some manner. Corroded and or loose switch or battery connections will cause a regulator to run hot
  2. dingbat

    Throttle linkage cable barrel at motor will not go into hole without moving throttle.

    Cables are not universal. If the mechanism is different it's pretty safe to assume the cables are different. Have you confirmed that both motors use the same cable? A brief search would suggest they are not
  3. dingbat

    Did a little saltwater fishing in SC last week.

    https://www.saltwatersportsman.com/better-popping-cork-styles-and-tactics/ Pogie is local terminology. Officially Atlantic Menhaden, known as Bunker and Shad further up the coast. We catch and net them. Never noticed a difference in longevity either way. The trick to keeping them alive is no...
  4. dingbat

    Only goes 20 MPH

    Ugh...... CAN and OBD2 are well documented and published SAE and ISO protocols and message structures. Unless the engine manufacturer developed and replaced the two with proprietary protocols and shared with Rinda this is BS. All you're buying is scan request and logging analyzer formatted...
  5. dingbat

    Trailer Manufacture Name?

    Been through this twice. Manufacturer would not issue a replacement decal. Had to register as "home made" and have a State issued VIN plate issued and attached
  6. dingbat

    solenoids?

    What's confusing? Polarity doesn't matter on the "slave" side of the solenoid. All your doing is sending a (low current) signal (blu/wht or grn/wht wire from switch) to Ground (blk)
  7. dingbat

    solenoids?

    From an operational standpoint, it doesn't matter. From a continued support standpoint, yes
  8. dingbat

    1900ESX Prop Cavitation?

    Is it cavitation or slip/flex? Have an old 14 x 19 aluminum prop with little, if any cup left that does the same thing. No problem over-powering it coming out of the hole Take it off and put the 15 x 15 Stainless prop back on and the problem goes away.
  9. dingbat

    Trailer needs new axle. Need ideas.

    Like this? https://www.championtrailers.com/1-1-4-straight-trailer-hub-67048-67048-s-15243/
  10. dingbat

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    Knowledge is power.....Welcome to the world of computer automation and controls.....lol We log on average 1 gig of data every 24 hours with a 5 day roll over. All internal and external interactions with level I and level II computers are time and date stamped. As is every internal...
  11. dingbat

    OX 66 - 250 , -2 stroke has a small coating of oil bottom of engine housing after use ?

    Oil laying about and 2 strokes go hand and hand. The nature of the beast ;) How old are the fuel and oil line? The oil line will start to permeate over time. Same thing for oil tanks. All bets are off after 10 years of service
  12. dingbat

    What is different about newer primer bulbs?

    Who is Invincible Marine? Learned long ago to use nothing but OEM Mercury or Evinrude Primer bulbs
  13. dingbat

    Which towing position

    I've towed in position #2 using the trailer lock, in case of hydraulic failure, on my motor for the past 20 years now. In reality, the center of gravity of an outboard (power head) is sitting almost directly over the steering tube. Makes little, if any difference to the forces exerted on the...
  14. dingbat

    Engine support while towing.

    A hydraulic cylinder by design is a shock absorber... your tilt lock not so much
  15. dingbat

    How Filters are Made

    He turned 86 last week. Still has all his fingers.
  16. dingbat

    Grady White Weather Stripping

    Call Grady. If they don't have the part they will give you the OE part number if nothing else.
  17. dingbat

    How Filters are Made

    Dad worked his way thru collage working night shift at Purolater. Job shop....finish first batch, change the paint color and graphics, run the next batch
  18. dingbat

    Just thought I'd share a nice photo.

    A Patapsco guy......
  19. dingbat

    Livewell Pump Noisy

    A squealing pump is typically a "dry" impeller or commutator bushing. It may or may not stop with some run time. Run it until it fails
  20. dingbat

    Prop performance question

    The "rules" only apply to props of the same design. The Enertia is a pretty heavily cupped prop. All bets are off when comparing props of different designs. https://www.miwheel.com/propeller-cupping/
Top