Search results

  1. alldodge

    Sea/Lake Food

    Opened the packages up and started to vuc-u-seal them and one package 2 of the steaks had some green on a couple of them. Had a light but bad smell to it. So oh well, when in doubt trow it out. The other package was fine but so the 2.99 went to about 5.50 lb. The second package had smaller...
  2. alldodge

    98 40hp, chrips then cuts off

    No expert but maybe my comments will bring them in With a chirp and then dies, and to add nothing happens when key is turned, sounds to me like bad or loose connection. Might be the key switch, maybe a chafed wire and when throttling back something makes contact. A bad connection will heat...
  3. alldodge

    Sea/Lake Food

    Nor would I (y)
  4. alldodge

    Mercruiser Alpha One, Gen 2 prop shaft rear seal r&r

    Welcome Don't know the year of drive serial number Don't think that will work, there are 2 seals in that location, one behind the other (items 56 and 57) https://www.mercruiserparts.com/bam/subassembly/30862/2686/150
  5. alldodge

    330 black scorpion low power

    Your throwing parts when the problem is yet to be found. The motor needs to be scanned for codes. You have a MEFI 3 ECM so checking for codes is easy Might be the MAP sensor or a bad sensor causing the 5V supply to drop below 5V. Measure the MAP or TPS to see if voltage is exactly 5V with...
  6. alldodge

    MR outdrive

    We could use some @Bondo input on this
  7. alldodge

    Herters 13.5 Needs a Motor

    The Suz 16 motor weight listed at 90LB The new 15 or 20HP motor weight is 107LB so not that much more
  8. alldodge

    Sea/Lake Food

    Might have to try that some time. Mom used Bloemer's chili base to start with and that's what I've used forever. That's just the starter, then I add in all kinds of stuff to make it like I want
  9. alldodge

    MR outdrive

    Have you tried driving them out from the back side? If you have most likely need to apply heat
  10. alldodge

    Sea/Lake Food

    Don't know about save a lot but have gotten the same type cuts at IGA grocery and they were good. Normally by a whole boneless rib eye on sale around 6.99 Lb and cut and trim my self
  11. alldodge

    Sea/Lake Food

    Admiral stopped by save a lot and found T-bones for 2.99LB, picked up 2 packages. I'm making chili and need ground beef, but just cant make my self do it. So I'm using some 4.99LB GB.
  12. alldodge

    serpentine belt

    Depends on the vintage of the motor, but usually no problems just cost money. Will need to change all the pulleys and brackets They make kits so look it up like at summitt racing. Might be able to find a bad motor and get stuff off it
  13. alldodge

    Alarm sound when turning the key - starter does not work.

    Really? Note the wire insulation jacket is deformed
  14. alldodge

    Lewmar 700 pro series anchor winch

    Agree in those issues there can be a major problem. I'm on a inland lake and therefore I put a shackle at the end. Maybe if on the ocean I would leave it off. With shackle off just put windless in free fall and the chain will run out faster then someone with a bad case of heresy squirts...
  15. alldodge

    Seeking Advice: Real-Time Bathymetry Solutions for a 25-Foot Boat

    Welcome Have heard of the system but never found someone that used it outside of marine biologists Hope someone here has used them and can advise
  16. alldodge

    Lewmar 700 pro series anchor winch

    I know this answer, you don't cut at least with mine, it was high tensile 1/4 inch. If ya had a 48 inch master key that would do it This happened to me twice, and I let out all chain, removed shackle off the end and let it fall. Came back next day with scuba tanks and reconnect
  17. alldodge

    Need Prop guy for Inboard - LI NY

    On Long Island https://www.bosslerandsweezey.com/ Long Island Propeller 1509 Rocky Point Rd, Middle Island, NY 11953, (631) 345-6295 S&S Propeller 2615 123rd St, Queens, NY 11354 (718) 359-3393
  18. alldodge

    Lewmar 700 pro series anchor winch

    And note this will be like putting a 100 pound person on the bow. Before you go with all chain get some sand bags or something similar and place it at the nose in the cabin. 1/4 chain weights .75 Lb per ft
  19. alldodge

    Lewmar 700 pro series anchor winch

    The issue isn't the grade it's the size of the links. Lewmar requires 1/4 ISO G4 or 1/4 BBB chain, used with 8 plait rode https://www.lewmar.com/Lewmar-Files/Manual_Pro-series-fish-manual-G3_B10414%20iss1.pdf Do you plan on splicing the rode to the chain? It can be done but needs a full...
  20. alldodge

    Force clamp screw bolt thread size?

    It's a Force OB, no metrics
Top