Search results

  1. R

    Shift rods out of alignment?

    There is no adjustment at the connector.-----I think you need to adjust at the top shift lever.-----There are no other adjustments on the 35 HP models
  2. R

    Shift rods out of alignment?

    I doubt that any 2 cylinder 35 HP models used a shift rod height adjustment.-----Other than the lower shift rod must be fully screwed into the yoke.
  3. R

    Need advise on old Mercury

    That decal was used in the 79 model year.----Install a new impeller before you use the motor.
  4. R

    Spark plug recommendations for 1973 evinrude 65 triumph.

    closed
  5. R

    1966 Chrysler 50hp won't steer, missing fuel pump.

    Pumps off a Johnson / Evinrude could be fitted.
  6. R

    Gear shifting issue evinrude 70

    Sounds like you need to look into and set the shift rod height.
  7. R

    93 evinrude 25 hp primer

    It is normal for this to occur I believe !
  8. R

    BF5A - gear case pressure testing

    Threads would be metric.----A marine store might have an adapter.----Try----West Marine
  9. R

    93 evinrude 25 hp primer

    Most 2 stroke outboard motors do have oil recirculation systems.
  10. R

    Help! 1968 33 HP Evinrude

    That thick special O-ring fits in that recess. ----Must be driven in all the way so it stays in there.
  11. R

    Shift rods out of alignment?

    A 79 model 35 HP may not be involved in the " setting the shift rod height " scheme of things.
  12. R

    Recoil pawl evinrude 25 hp

    The idea here is that at compression the elliptic sheave moves the rope outwards from center.----Gives you a mechanical advantage.----Something used for 40 years or more on this style of recoil.
  13. R

    Recoil pawl evinrude 25 hp

    Post #12----I believe it is clear when you look at the parts.----And do not worry about when pawls engage relative to how far the rope is pulled..
  14. R

    Recoil pawl evinrude 25 hp

    This recoil assembly is " timed " to take advantage of the eliptical sheave !!-----Do not go changing the length of the roped by guessing.
  15. R

    Help! 1968 33 HP Evinrude

    Part # of the new bushing.----Was there a recess for o-ring in the bushing.
  16. R

    Recoil pawl evinrude 25 hp

    Did you time the recoil ?----See the arrow on the housing ?-----See the simple instructions on the sheave ?.
  17. R

    Force 120 1976 - Was running great, then gradually lost ability to idle. - Need Help Please

    I think motor needs to come apart for proper repairs !
  18. R

    Timing Retard

    The timing tool is nothing but a " dummy flywheel "----You can use the flywheel you have to set points with a meter !----Little extra work , but it can be done.
  19. R

    Starting a fire with a sandwich bag

    Saw a buddy light his cigarette with his eye glasses years ago.
  20. R

    I assume I need an engine alignment, vibration when drive is engaged

    Did motor come with warranty ?-----I would start with a compression test.----Post the numbers here.----Are all plug wires on correct cylinder ?
Top