The bilge is fused straight from the Bat. The blower normally has no connection to ignition power.
Look for a 20 amp inline fuse on the Red/Purple wire
Also measure voltage on the Red/Purple it should be there always
We have a few butter fly bushes, flowers all over the place, Bee bath (flatter then bird bath with small rocks in it so Bees can get a drink), bird feeders and houses, and a Bat house. Also a garden
ok, you should be good, so long as your not worried about the water which may get trapped under it.
If the pvc pipe is being used to run wires and such, might think about mounting it under one side of the gunnel, might be easier and provide ease access
Have not been around your kind of hull but your plan should be good. Are you going to fill with foam under the deck or use other support methods to support? Going develop another method to support the sides or are the bottom and side supports will remain?
The pvc pipe will work, and 5200 will...
Best guy to answer the question is @muc
My thinking is the crossover is something that helps keep the entire motor more the same temp all over. With pre-cross types the thermostat did all the work, with cross types the circulation pump keeps all coolant moving between pump and block until...
Bearing clearances need to be sized for it, and return oil channels from the heads need to be sized so it can take the return. Then need an oil pan large enough so you don't run out.
Need to block off the bypass on the block otherwise all the extra oil dumps back to the pan so increasing...
The lube will drain out over time but being its thich it takes quite a while. When running it moves easier because its warmer and under slight pressure. I like to wash the lube bottle out with some diesel or other light weight oil
