Search results

  1. alldodge

    Last year of internally painted fuel pumps?

    It's an anodized coating and this is what Merc said when I asked the question
  2. alldodge

    Overvoltage error on Kohler Generator

    Unsure but check the voltage that it is high, also check that the Hertz is at 60 If the motor RPM is not correct this could cause the issue
  3. alldodge

    692 DDEC 111 turbo spirals down?

    Don't know the motor, would need to look it up No smoke would mean maybe injection pump, throttle linkage or in short the cylinders are not getting enough fuel. Not enough fuel turbo doesn't spin up
  4. alldodge

    Volvo Penta 5.7 GSi No Spark

    Motor serial number is best? Looking at a GSI (with other letters) I'm seeing EST distributor, VST high pressure pump and TBI Is this what you have?
  5. alldodge

    Wont restart

    Need a motor serial number to verify but for now I'll assume this is your motor https://www.mercruiserparts.com/5-7l-gm-350-v-8-1988-1995-0b525982-thr Does it have a 2bbl or 4bbl carb? To clarify a statement you said it cranks but does not turn over. For most of us those 2 terms mean the same...
  6. alldodge

    Vintage Mercruiser Tach Pole Question

    If you go to the link then look at the pic of the back it shows how many
  7. alldodge

    Mercruiser 5.0 dies while idling - no fuel from line

    With an electric fuel pump, take a piece of fuel line and streatch it over the end of the line and attach gauge to it
  8. alldodge

    Mercruiser 5.0 dies while idling - no fuel from line

    Valve just look for 3/8 anti siphon valve. This is one at summitt https://www.summitracing.com/parts/moe-033801-10 Connect the gauge direct to the fuel line going to the carb and crank the motor to see what pressure is there To check vacuum, need to make a Tee fitting up and place between tank...
  9. alldodge

    Mercruiser 5.0 dies while idling - no fuel from line

    Need to start somewhere and fuel pressure is the easiest Can get one at HF for less then $15 https://www.harborfreight.com/fuel-pump-and-vacuum-tester-62637.html
  10. alldodge

    master bath remodel

    Got it Agree those sharkbite fittings are expensive. I've used a few of them. A house I bought the PO buried one in the ground going to a hydrant. It came apart on me after a few years and found the yard flooding. Currently use the Pex crimp fittings
  11. alldodge

    master bath remodel

    It worked out but wonder why not 90* then one pie to a 45* or 22* The new location does look good Buddy of mine remodeled his and had his toilet sitting in his spare bed room for around 2 months. Used shopping bags to line the toilet, had a small table and some magazines next to it. Went...
  12. alldodge

    Control box???

    Don't know where but should be on or near the thermostat. With a serial number it could be looked up https://www.mercruiserparts.com/all-mercury-mariner
  13. alldodge

    Lewmar Anchor Windlass

    According to Lewmar it must meet 1/4" BBB grade 30 or 1/4 ISO G4 galvanized chain Search for that https://www.lewmar.com/node/11626
  14. alldodge

    Need to decarb help plz.

    Hey @jerryjerry05 can you assist
  15. alldodge

    Chrysler 6 HP points

    If I understand you correctly, your saying your use to seeing the rub place on the points stay in contact with the cam. I would say that should not happen, reason being is if it did then anything (spec of dirt or crud) could open the points and cause a misfire Did I understand correctly?
  16. alldodge

    2008 4.3 ltr. TKS diesels when turning off

    First check timing and make sure its at 10* BTDC in base timing mode Being a TKS, there is extra hissing going on when cold. Does the sound stop within 10 minutes are so?
  17. alldodge

    Control box???

    That's trim control Blue/White = Trim UP Green/White = Trim DOWN Red = Battery power Brown/White = Trim gauge and sender Tan = Water temp gauge/sender
  18. alldodge

    Alpha One Gen 1 transom assembly seal

    I would bellows adhesive on the assembly side and nothing on the transom side I see a crease in the gasket
  19. alldodge

    Top Speed Issues

    Using 8 to 10 gal/hr doesn't sound bad. That's 4.6 to 3.7 miles per gal at WOT, but guessing you may be in the 25 mph range so still good at 3.1 to 2.5 miles per gal. My Rinker (23ft cuddy at 4800 lbs 454) gets about 2.5 to the gal.
  20. alldodge

    Alpha one Sterndrive

    What motor? serial number is best but at least a year, and when was the motor redone? and no its not coming from the drive
Top