Search results

  1. alldodge

    92 4.3lx Mercruiser starter

    My guess, carb needs a rebuild. Smelling gas because the float is sticking and its flooding
  2. alldodge

    Bass boat cap pull?

    Yes, mine where. There is a brass or aluminum tube which goes clear thru. Need a special flaring tool to install new one (I bought the tool ). Also the core bond is between splash well and transom
  3. alldodge

    How much should extra weight slow me down?

    Don't remember which 4.3 you installed or boat for that matter, but not a much HP difference between the two motors. Torque should be a little better. When I was running heavy and/or pulling skiers, would reduce the prop pitch. Came out of the whole easier and would over rev at WOT, but I...
  4. alldodge

    Nav lights not working

    They worked before so start with the fuse. Then use a meter and trace power
  5. alldodge

    Merc. MPI 300 Water Leak-Water Distribution Housing? & Winterization Question

    Take the plug to the auto parts house and get one of the rubber expansion ones like Scott mentioned The thermostat cap does not screw off, its just glued down pretty good
  6. alldodge

    Bass boat cap pull?

    The drain tube I'm talking about was where the motor splash well is
  7. alldodge

    Mercruiser Alpha One Series One, no Reverse

    We could figure it out, but just look at the lower cable how it moves when placed into forward. Your not going to hurt anything by going the wrong direction
  8. alldodge

    Belt Squeal

    Use a steel straight edge and place against the pulley to see which way the other pulleys need to go. As Bondo said we would have to be there and look at it to determine. The Power Steering pulley can be moved in/out with a PS puller/installer. The others would need to be shimmed or...
  9. alldodge

    Bypass Trailer Switch

    The trim is fairly simple setup. The trailer switch is only used to raise the drive and not lower. It can be bypassed by jumping the trim limit switch together. Then the trim switch will fully raise and lower the drive In the pic, there is a blue/white and purple/white wire that connects to...
  10. alldodge

    Mercruiser Alpha One Series One, no Reverse

    Can try to adjust lower shift cable but best guess is the lower shift cable needs to be replaced
  11. alldodge

    Time for a ‘new’ boat?

    Another note: with the 328 weighting more, your going to want max HP. Your 330 had 330 hp motors, wonder if it comes with 502's
  12. alldodge

    Wood cost

    Ya know, about a month ago I burned up 2 wood decks in a bond fire, and half of one of them was just a year old. The ground hog thing :( Just didn't want to try and save it. Did spend 2 afternoons with my rare earth magnet and filled up a 5 gal bucket with nails and screws
  13. alldodge

    Time for a ‘new’ boat?

    Doesn't look like you will need a dually I would pull it with my 2500. Even at 11K dry I could pull it. Or have your own trailer and no longer need to have it blocked, just hauled
  14. alldodge

    92 4.3lx Mercruiser starter

    I would recommend this one. Its PMGR and I have it on my 509 https://www.apimarine.com/marine-electrical/mercruiser-omc-volvo-starter-50-863007a1-3860566.html
  15. alldodge

    92 4.3lx Mercruiser starter

    Yes it matters. Your old starter was designed for use with an electric fuel pump. The new one does not have this feature.
  16. alldodge

    Alternator, alternatives to an OEM

    There aftermarket but should work. Walmart sales ones from rare electric Could also find a local repair shop to fix yours
  17. alldodge

    Overheated, need help identifying pink liquid-

    Pink - power steering fluid overheat - watch the gauges (oil and water) and get your alarm circuit working. Check the hose clamps, use a nut drive and see if they can be snugged up. Bilge pump working?
  18. alldodge

    Bass boat cap pull?

    Also need to remove the upper drain plug tube
  19. alldodge

    Bass boat cap pull?

    Look at the stern, mine have core bond between upper and transom.
Top