Search results

  1. alldodge

    3 batteries, 2 switches... Am I over thinking this?

    Agree ACR
  2. alldodge

    Dual Batteries - One died.........

    No, only way is if it was running Yes, if the amp was ON even if radio was OFF Yes No, both do not need to be identical No, issue with bats attached to same switch so long as one bat does not have a problem and switch stays connected. The switch connection places bats in parallel, and they...
  3. alldodge

    Starter question on a 5.7 gm--

    Its a new starter, I wouldn't mess with trying to fix it without input from the vendor, don't want to mess it up, or have them think it was messed up and they won't take it back Wiring is
  4. alldodge

    Catch a Contractor TV

    Understand :)
  5. alldodge

    Siding cost

    Have vinyl sided a few houses and don't remember it costing a large amount, so wondering if my brain can no longer do simple math, or has the cost gone up that much in 20 years. As an example; a box of cheap vinyl contains 200 sq ft, and cost $130 or so. Using round numbers, house is...
  6. alldodge

    Factory Alpha 305 Quadrajet vs 350 Quadrajet

    This is from Manual 17 page 5C-2 which can be found in link below http://boatinfo.no/lib/mercruiser/ma...cruiser17.html Here is the page If you go to page 5D-2 is for the weber carb
  7. alldodge

    5.7gi 300r

    Have come up empty at boatinfo, the manuals are not that new. Also come up empty trying to find VP 14 to 10 pin wiring, or even a newer harness which uses the 14 pin connector. I'm still working on it but come up with some guesses and maybe some others can fill in some of the blanks. Double...
  8. alldodge

    What to do now

    What did you just say :noidea:
  9. alldodge

    Oil priming

    1:25 to a gallon might be good for idling but not for much more RPM then that, that's a 80:1 mix
  10. alldodge

    Replacing two wire switch with three wire version

    The one you removed provided power to the float switch (via fuse) and then to the pump. The switch at the helm bypassed the float switch and went direct to the pump. Your current helm switch should have power going to it. On the other leg of the switch it will go to the the old pump. This...
  11. alldodge

    Replacing two wire switch with three wire version

    The ultra bilge switch wiring diagram is terrible. The guy might know how to make a switch but has no idea how to make a wiring diagram. With limited info on the website I'll say the switch works like any other switch to make connections to the pump, the difference is in how the switch works...
  12. alldodge

    5.7L Water Heater Connection

  13. alldodge

    Random

    Bb64
  14. alldodge

    Raw Water Pump

    There is more room with small blocks A poster on OSO listed that the 496 (also 8.2) uses quick connects on the hose now. Male 22-865362 Female 22-865324 These will work and will pick up a set to see if I can get it placed to gain access to. They will be under the motor, so that will be an...
  15. alldodge

    Raw Water Pump

    Have looked at them, but most of those will restrict the flow due to low pressure, or at least from the ones I looked at. Most the pass thru shrinks down a bit as they pass through. Have looked at the trash pump style but think there would be an issue of size vs adapters. Smallest I've found is...
  16. alldodge

    Raw Water Pump

    Installed the Hardin water pump 2 seasons ago and also replaced the intake hose from the transom. To remove and replace of the pump is a real bear on my motor because there really is no room, so have to hang upside down for the most part. Installing the first round I removed the exhaust...
  17. alldodge

    Air Rifles

    Looking into getting an air rifle and want it to have a bit more power then then one I had as a kid. Currently looking at the Benjamin Marauder and the Umarex Gauntlet in the 22 and 25 cal. Both use PCP so filling is either a hand pump or scuba tank. Marauder seems to have more abilities for...
  18. alldodge

    2003 and 2006 6.2L Horizon Fuel Filters

    The key with any conversion is to maintain the correct fuel pressure. Manual 24 indicates 30 psi at 1800 rpm Have not looked in depth but since the same year motors (Bravo/Alpha) can have either pump and only difference is the drive, I would assume either would work. The Bravo moves more...
  19. alldodge

    Wanting a bush hog for my tractor

    The rear supports needs to flex so when the tractor Vee's so to speak. If it doesn't then things bend or break. It can be just a piece of chain. The John Deere MX uses solid arms with a slot. The issue with this setup it looks good, but the bolt keeps breaking when doing rough stuff.
  20. alldodge

    Volvo Penta 5.7 GSIPWTR Temp Sender

    The 3852029 is used for dual station setup. as a boat which has a second station on like a fly bridge. You have a single station helm so you would use 872068, or a 240 to 33 ohm
Top