Search results

  1. R

    45 MARINER???

    I would guess it is an 87 model.-----Perhaps see if you wrote down all the numbers in the serial number.
  2. R

    No water discharge from port 1967 33hp evinrude

    Sorry if you mis-understand !----The o-ring fits in the groove at the top of the driveshaft.
  3. R

    Just bought a 93 48spl

    The 48 SPL models did not come with oil injection.----Other 1993 model might have oil injection.--Therefor 2 hoses., one for oil and one for gasoline.-----Good question if oil injection was fitted on that motor.------Pictures of the parts are needed.----Visit your friendly boat shop and ask...
  4. R

    25 hp no spark

    Throwing parts at it gets expensive.----What trouble shooting was done ??
  5. R

    No water discharge from port 1967 33hp evinrude

    I think that o-ring fits in the groove of the driveshaft.---Just below the upper spline.----It seals the crankshaft spline and driveshaft spline.----Keeps the crankshaft spline from rusting out !!----Very important part.----And that o-riing has nothing to do with the operation of the water pump !
  6. R

    460 King Cobra oil pump

    Well----If there are --" pieces of metal " ---on an oil pump screen there are more problems than a worn cam.
  7. R

    Boat Inspection Jupiter FL

    These big container ships are just awesome.-------Just do the math on one full of shoes.-----Shipping comes down to mere pennies per pair.
  8. R

    Boat Inspection Jupiter FL

    Perhaps hard to find the ----" perfect boat "----In Australia.-----In some parts of the world there are huge luxury taxes on new boats.----Used can be a good deal if you are capable of doing your own upkeep.
  9. R

    2015 Mercury 115hp Lower Gear oil level check

    You fill from bottom.----Put vent plug in.------Then remove filling device and install bottom plug.-----You should only lose a few drops.-------Then you can tilt motor part way and try to add a few drops at the vent screw.
  10. R

    Winterizing 350 mag?

    Put the anti-freeze bucket above the impeller.----Make 100% sure the impeller does not run dry !
  11. R

    Boat Inspection Jupiter FL

    Best be careful with spending money out of ---" arms reach "-----Buying from a dealer ?----Post a video of this thing running ?
  12. R

    6hp fisherman idle issue!!

    Does spark jump a gap of 1/4" or more on both leads ?-----The motor should respond to low speed mixture , so revisit carburetor work.-----Check the pointy end of low speed mixture screw.---Post a picture of it.
  13. R

    Stator question on 1976ish mercury 1150

    Was a new water pump impeller installed ?----Compression test values should be posted.-----Battery load tested ?
  14. R

    Voltage regulator/rectifier compatibility 86' 110

    Just install the cheapest parts.----Should work for charging the battery.
  15. R

    Stator question on 1976ish mercury 1150

    Trouble shooting is not easy on these things if you are working on your first outboard.-----Helped an owner a few years ago with a similar ( 85 HP ) motor.----Shop said they could check it , Get it running for about $1500.----We had it running without spending a penny.-----Choke was not wired...
  16. R

    Stator question on 1976ish mercury 1150

    Your best bet is to do some trouble shooting.------cdielectronics-----Might help you find the part that is defective.-----Throwing parts at these motors gets expensive in a hurry !
  17. R

    Evinrude Big Twin 35 Restoration

    The absolute first step is to take the motor apart in order to evaluate the condition.----Don't buy repair kits only to find that motor is totally a lost cause.
  18. R

    Unknown motor I have

    Read post #4 !!-----Should have stated that is an Evinrude I guess.
  19. R

    Any info on Suzuki DF90ATL

    It is a wonderful motor.----Read your manual twice before turning the key.-----Insist that the dealer spend up to 1 hour with you , so you learn how to operate this machine.
  20. R

    Unknown motor I have

    Really-----That model # indicates that it is a 9.9 / 15 HP 1990 model.----The powerhead clearly is a 9.9 / 15 HP.-----Why would you think this thing is a 1965 model.
Top