Search results

  1. T

    79 Johnson tilt and trim

    Thank you jimmbo I do have a factory service manual for an 83 Johnson 140 hopefully it will help I had not looked at it yet thanks
  2. T

    79 Johnson tilt and trim

    My friend has a 79 140 Johnson and the power tilt and trim stopped working the motor runs fine but it will not raise the motor or lower the motor we can use the bypass screw to raise it and lower any help would be greatly appreciated
  3. T

    115 mercury

    Thank you Racerone the boat don’t idle good and just plows the water don’t get on plane then sometimes it will kick in and run good and idle good thanks again for your help
  4. T

    115 mercury

    No spark top plug coil was checked with ohmmeter same as coil below it I don’t know what a 2+2 is please explain thanks for your response
  5. T

    115 mercury

    My friend has a 1989 mercury 115 carburetor motor with no spark to top plug 4 cylinder I was wondering if you could tell me what the power pack is called on a mercury stator wires go to it coil wires go to it I need to get an approximate price so I can tell him thanks for your help
  6. T

    1996 Evenrude 90hp

    Thank you very much Racerone you always help very much
  7. T

    1996 Evenrude 90hp

    I’m trying to get the torque spec for voltage regulator thanks for any help
  8. T

    V-4 cylinders

    Chamfer May be a better term
  9. T

    V-4 cylinders

    Would it be advisable to bevel the exhaust and intake ports in a cross flow motor thanks for any response
  10. T

    V-4 Johnson 140 hp

    I guess to fix what I have messed up but live and learn I bought this motor for parts I have a J140tlcte a local guy rebuild it sent block to tenn put 4 new wiseco pistons in it bout 10years now still doing good so thanks guys I really appreciate what you do on here
  11. T

    V-4 Johnson 140 hp

    Thanks Fastbullet for your expertise I’m sure you are right I am about 6hrs drive away from a block shop that I would trust I may plan a fishing trip to that area and have them bore it thank you for helping me decide to do that good time to go to central tenn
  12. T

    V-4 Johnson 140 hp

    I have a few thousand to go yet
  13. T

    V-4 Johnson 140 hp

    It’s 17 thousands over my plan is to put 20 thousands over piston and rings in it thanks
  14. T

    V-4 Johnson 140 hp

    Racerone thank you for your answer model # j140tlcnb I bought it as a parts motor I started checking it out just nosey and I found a ring broke took it apart honed the cylinder scratch out I don’t want to put dollars in it but thought i may put a piston in it just to see if I can get it running...
  15. T

    V-4 Johnson 140 hp

    If you tear a motor like this and replace a piston do you have to re- time the motor after u put it back together
  16. T

    1998 8hp E8RECR Fouling and runs poorly.

    ii would at least take carb apart and clean maybe spray little premix fuel in carb while running to see if it makes any difference adjust mixture screw back where it was good luck
  17. T

    Johnson 50hp 1996 won't switch off at key switch.

    just so u know an automotive key switch will not work on a boat hope this helps
  18. T

    1992 Evinrude 115 overheating

    if yours has a rubber hose coming out the bottom of head remove one at a time if you have iots of water flow then your theromostats faulty blocked or something just my thoughts hope you get it fixed
  19. T

    nothing works

    dont forget the kill switch
Top