Search results

  1. A

    First launch of our boat

    One of those new electric outboard ??
  2. A

    For those of us who tow our boat, do you inspect it ?

    Many trailer frames have no drain holes in the frame....they need to have some if the welded frame seems to have most of it enclosed. Especially boxed frames, mine is mostly U shaped frame so not an issue.
  3. A

    1985 Starcraft porpoising issue. Prop??

    The opposite shape is a " rocker" in the keel which produces outward more in the center from the front and back. A rocker if severe is a cause for porposing that can't be controlled.
  4. A

    2018 E-TEC 25 hp Not Running Well

    Sure glad I stick with the old fashioned two strokes, I feel sorry for those that try to tackle these newer electronic powered motors...ouch, gives me a headache..
  5. A

    1985 Starcraft porpoising issue. Prop??

    And watch your tach.....mine shows a significant change in rpm when making even small trim adjustments.
  6. A

    Forums are very slow…

    Connections to "I boats forums" have been very difficult to make here in recent weeks. The gateway timeouts seem to be the normal here of late ! Hopefully this gets corrected soon........?
  7. A

    I Got Me a Mercury !!!

    what dingy looks heavy....is it ?
  8. A

    1985 Starcraft porpoising issue. Prop??

    While I do consider them a last effort, you might consider adding a tail fin on the cavitation plate on your outdrive. I have saw them solve such issues. Being a toolmaker, I have always made my own from SS sheetmetal, they worked much better and were smaller than the big plastic contraptions...
  9. A

    For those of us who tow our boat, do you inspect it ?

    What to many horror stories around my area due to the boating popularity of being in the "Walleye Capital" ...You would be shocked at what you see at the launch ramp after the boats are off the trailers ! Gives a person a real kick in the pants to check their own trailers.
  10. A

    1985 Starcraft porpoising issue. Prop??

    I have always adjusted my prop pitch to give me max wot rpm with just me onboard, this way adding extra passengers and gear will keep my rpm in a safe range yet give me best speed. I always carried a spare prop with 2" less pitch for skiing and knee boarding than o get the hole shot. I would...
  11. A

    Boat Horn Confusion

    Corroded wires or connections.....
  12. A

    ProV bass fuel sending unit

    Been using Sea Foam for over 20 years with no issues like that. Sending unit is in the tank or attached to the top of the tank. Uncover the tank or follow the hoses/ wires and fill hose....you will locate the tank and fittings. No one said it will be easy, usually lots of stuff to move out of...
  13. A

    Strange boat disease strikes.

    Actually Starcraft was busted by the gov't for creating a monopoly on aluminum boats. The company was forced to breakup and Sylvan, Northwood, and Smoker craft was formed along with some other small boat companies.
  14. A

    Strange boat disease strikes.

    In all honesty....I think it comes down to how the boat is stored and maintained ! Look around...I am out in the country where there are numerous barns and outbuildings, most have a boat sitting outside and very few have covers on them. Some have not been moved in years. Within a 5 mile...
  15. A

    Strange boat disease strikes.

    Or most any other aluminum boat......My 1992 Sylvan is all original, floors are all 3/4" plywood an an all aluminum transom. Some day handy new floors and a carpet refresh, but probably not in my lifetime....
  16. A

    Random

    Gotta chuckle looking at the bears face as he tries to open the feeder... "What"...you lookin at me ?
  17. A

    Random

    Actually that is pretty cool....where is the outboard ??
  18. A

    Installing a transducer in an aluminum boat

    Only needs to be about a 1/2 mabey 3/4" below, sometimes less. Never mount in line with rivets....angle the rear slightly lower than the front. Worse case scenerio.....smooth out the transom rivets with some body putty and sand smooth to give a smooth water flow over the transducer. My...
  19. A

    Partial transom repair

    On two occasions it was quite funny, but on one occasion a passenger drown from not wearing a life jacket...young kid !
  20. A

    Installing a transducer in an aluminum boat

    Should not be an issue at speed with a transom mount transducer. I have owned many over the years, including my current Sylvan aluminum hull that is riveted. Reads very well at 30 mph, as did my 22' Star craft Islnder. If it doesn't read at speed, you have it mounted incorrectly. Numerous...
Top