Search results

  1. dingbat

    Grady White Weather Stripping

    Call Grady. If they don't have the part they will give you the OE part number if nothing else.
  2. dingbat

    How Filters are Made

    Dad worked his way thru collage working night shift at Purolater. Job shop....finish first batch, change the paint color and graphics, run the next batch
  3. dingbat

    Just thought I'd share a nice photo.

    A Patapsco guy......
  4. dingbat

    Livewell Pump Noisy

    A squealing pump is typically a "dry" impeller or commutator bushing. It may or may not stop with some run time. Run it until it fails
  5. dingbat

    Prop performance question

    The "rules" only apply to props of the same design. The Enertia is a pretty heavily cupped prop. All bets are off when comparing props of different designs. https://www.miwheel.com/propeller-cupping/
  6. dingbat

    Moving the filter

    My bad.....considering most motor manufacturers recommend the use of a 10 micron or better fuel filter, a rock and stick collector isn't the first thing that comes to mind when someone says "fuel filter"
  7. dingbat

    Perko dual battery switch

    Setting the switch to #2 simply connects the starter to the "house" (second) battery. Battery #2 is dead or not wired correctly to the switch
  8. dingbat

    Merc prop selector

    If you have concerns go with the Merc Flo-Torq SSR FWIW: The Enteria prop rattled horribly when trolling. Ended of changing out the Merc Flo-Torq II (Delrin) for a Rubex RBX hub (rubber) to eliminate the Noise
  9. dingbat

    CDI High Speed Failure

    Playing Frankenstein with a charging systems is risky. Not much tolerance for miss matched components.
  10. dingbat

    Stainless Prop Film

    Here is a test for you...... Remove the positive battery cable from the battery. Test for continuity between the positive battery cable and the prop. Should be an open circuit. Next, test for continuity between the prop and the negative battery terminal. Once confirmed, switch your meter over...
  11. dingbat

    Just thought I'd share a nice photo.

  12. dingbat

    Steering Question

    Could be either place. My guess is the cylinder at the motor
  13. dingbat

    Steering Question

    Your seals need replaced
  14. dingbat

    Multi Function gauge for 2004 Yamaha F150

    Displays are no longer proprietary to a particular motor or brand. You will need a gateway to covert to NMEA2000, but once done, there are any number of multi-function displays on the market that will work.
  15. dingbat

    Did a little saltwater fishing in SC last week.

    The trick is live bait..... Keep dead bait to chunk for sharks at night Live line rig....6/0 Gami circle hook and a #50 mono leader. Typically no weight, but some could be added if the fish are deep. Leave reel in free spool. Doesn't take long if there are fish around. Live shrimp or mullet...
  16. dingbat

    Wash Down Pump

    PSI I have 4.0 @ 60 psi and it does a great job. Should mention, the coiled hose supplied with these units sucks. Too small. Replaced mine with a 5/8" sanitary hose. World of difference
  17. dingbat

    Kodiak Anchor - Made by SouthCoast Marine . . .???

    Cold worked (tempered) when bent. Cold worked (tempered) when straightened. Could straighten and anneal to like new strength, but wouldn't be cost effective unless you do the work yourself
  18. dingbat

    Easier time putting on the trailer

    Ever tried getting a #5,200 boat on or off a trailer by yourself? No comparison between the two if you have weight to deal with. My previous trailer had 32 rollers ($$$), 12 articulations to maintain (pain) and a #4,200 electric winch to get the boat on the trailer. Had to use the winch to...
  19. dingbat

    Moving the filter

    Rock and stick collector. Not a coalescing filter
  20. dingbat

    1994 v6 problem

    Not saying this is your problem, but I've had many coils test OK yet are compromised. The insulation breaks down over time. If I see any cracks whatsoever in the epoxy it gets replaced.
Top