Search results

  1. brim_buster

    Jap sea bee

    British made in the 50's and 60's Im getting you some more info bear with me. Prop pins are notorious for shearing from what Im reading
  2. brim_buster

    Jap sea bee

    Transom is where the brackets hold the motor to the boat
  3. brim_buster

    Jap sea bee

    Does it have a tag on the transom with a model #
  4. brim_buster

    1972 Ted Williams 3hp Gamefisher won't idle

    And dont only search Ted or Gamefisher, those are all Eska motors. They have a leg that was made by Clinton with a Tecumseh power heads
  5. brim_buster

    1972 Ted Williams 3hp Gamefisher won't idle

    Its a 75 and a 3hp. 32:1 fuel mix and you can find one on ebay or amazon but you will have to do some modifications
  6. brim_buster

    1972 Ted Williams 3hp Gamefisher won't idle

    Also I would run a 24:1 mix if its pre-1974. Thats what the service manual suggest.
  7. brim_buster

    1972 Ted Williams 3hp Gamefisher won't idle

    Can you post model number. But however initial start up is one turn out from seated both high and low speed jets. Adjust from there to achieve max performance. Your post says 3hp and it looks to be a 5
  8. brim_buster

    Sears Gamefisher 1998 9.9h

    FYI that is made by Force. Probably not hard to find on ebay
  9. brim_buster

    Wha year model?

    1974 made by Chrysler its a 6hp
  10. brim_buster

    Ted Williams idling bad drive shaft

    Is it possible the drive shaft is stuck in the power head. I had a late 80's model made by Force that the shaft was stuck due to the splines being wopped up
  11. brim_buster

    Ted Williams idling bad drive shaft

    217-59430 is a 1971 5.5 hp
  12. brim_buster

    Ted Williams idling bad drive shaft

    Share a model #
  13. brim_buster

    Ted Williams idling bad drive shaft

    So its an Eska? or McCulloch? Sears had motors made from multiple sources
  14. brim_buster

    Sears Ted Williams 7.5 HP carb?

    Did you see the private message I sent you?
  15. brim_buster

    Sears Ted Williams 7.5 HP carb?

    My bad number 28. The list says rubber o-ring
  16. brim_buster

    Ted Williams idling bad drive shaft

    Mite wanna pull the powerhead and look at the splines in there to make sure they arent stripped
  17. brim_buster

    Sears Ted Williams 7.5 HP carb?

    I swear Im getting old. It was right in the description that it was a McCulloch.
  18. brim_buster

    Sears Ted Williams 7.5 HP carb?

    #29 o-ring goes with jet
  19. brim_buster

    Sears Ted Williams 7.5 HP carb?

  20. brim_buster

    Sears Ted Williams 7.5 HP carb?

    What manufacturer? Got a model number. Its not an Eska with that carb. Is it a McCulloch?
Top