Search results

  1. brim_buster

    1963 ESKA Golden Jet 600, Motor model: 645-01

    Thats correct
  2. brim_buster

    Eska 1945a

    I sent you a private message on parts for your motor
  3. brim_buster

    1980 Gamefisher

    Check your private messages
  4. brim_buster

    1963 ESKA Golden Jet 600, Motor model: 645-01

    Check the points and yes the prop should turn. Spin 180 for reverse. Spark should be a pretty blue and cross a 1/4 gap. If not check points ( clean and re-set) Ohm test condenser's or replace. There is a fuel pump element on the back side of the carb probably needs replaced. It comes in the kit...
  5. brim_buster

    1980 Gamefisher

    40:1 mix with TC-W3 oil. Regular foot marine foot oil. In-line fuel filter between tank and carb.
  6. brim_buster

    1988 Sears Gamefisher 9.9 - ignition problem

    https://www.ebay.com/itm/125464825232?hash=item1d36494d90:g:PVoAAOSwSn5i-kFI&amdata=enc%3AAQAHAAAAoIkpcwjyL%2Bfnl77Xh821Ubhh6QqRapCCo8C5TvcjHE5CtHjfqCnrvfWf496k3MUUgP09%2Ff08WDeDfkUeQgboIEIRpsUDnTscVE16Q88IsySWXyd5A9GWRo%2BgOKO%2Btgt1%2FIjdlHe46CozZgc1X8DzpilBQBXFPT0Save8u2ddQshZucj9vlqDwwXzNzzKW...
  7. brim_buster

    1988 Sears Gamefisher 9.9 - ignition problem

    You can buy the magneto only and put it on the lamenet. Its a Wico prestolite coil made for many years and used on different machines and outboards. Thats really pricey. I would keep shopping
  8. brim_buster

    1988 Sears Gamefisher 9.9 - ignition problem

    And that motor is made by Force. Mercury dealer probably has the coil but I would look on-line much cheaper that way.
  9. brim_buster

    Reverse Lock Out

    Not always. Most have a pin or a latch. Most people dont lock them down because it will save your foot from busting if you hit something solid like a tree or stump.
  10. brim_buster

    Older ESKA

    Have you rotated the shaft to see if they are opening? Dumb question but had to ask. Ohm test the coil.
  11. brim_buster

    7.5 gamefisher

    1984 one of the last ones made by eska
  12. brim_buster

    Purchasing a 1960s Sears 3.5 - questions

    That my friend is a Clinton 63-65
  13. brim_buster

    Purchasing a 1960s Sears 3.5 - questions

    OOps my bad I read the model number wrong
  14. brim_buster

    Purchasing a 1960s Sears 3.5 - questions

    I sent you a private message
  15. brim_buster

    7.5 gamefisher

    Got a pic?
  16. brim_buster

    Purchasing a 1960s Sears 3.5 - questions

    1961 Voyager 300. No impellor 3hp Eska
  17. brim_buster

    Purchasing a 1960s Sears 3.5 - questions

    Compression is #1. If not a possible re-build. Ive had people say great compression and I tell them Im bringing my tester and the ad disappears for some reason. See if it has spark. Than remember alot of boat mfg's made a Sears motor. In the 60's possibly a McCulloch. Good motors
  18. brim_buster

    7.5 gamefisher

    If its black its made by Force. 88-89 yr. the only year they made a 7.5hp I had a 7.5 and a 9.9. Easy motors to work on. Fairly simple. Can still find parts ran good.
  19. brim_buster

    Older ESKA

    Check your private messages
  20. brim_buster

    Older ESKA

    Did some research that power head made in 1967 its a 5hp. Trying to figure out the letter C
Top