Search results

  1. tg3690

    How long have you owned a Chrysler Outboard and what has been your experience

    Hey Jerry....what is your preference.....a temp gauge or pressure gauge?
  2. tg3690

    How long have you owned a Chrysler Outboard and what has been your experience

    If for some reason that plug turns out to be 1/4" or 3/8" (larger than 1/8) I have the adapter bushing kit to allow the 1/8" sender to be used. I bought it but didn't need it. Have no use for it so if you need it let me know.
  3. tg3690

    How long have you owned a Chrysler Outboard and what has been your experience

    My engine had a threaded hole with a plug on top of the engine near the thermostat housing. It was 1/8 NPT.....the sender screwed in there. Some have used that hole to add a telltale also. Not familiar with your engine so maybe another member on here has the answer.
  4. tg3690

    How long have you owned a Chrysler Outboard and what has been your experience

    Are you sure your engine is a 1974? Several parts diagrams I looked at (Crowley and Marineengine) don't show a 135 hp until 1976....and they show a thermo switch you would need to install an alarm. Do you know your serial #? Or model #?
  5. tg3690

    How long have you owned a Chrysler Outboard and what has been your experience

    Iboats sells the parts I bought....I used Faria products......2 inch water temp gauge #12812 (100-250 degree). Temp sender #TS1029 1/8" NPTF for American Single Standard. Some, like Racerone prefer a water pressure gauge? I wanted the temp gauge. Their 2 inch gauges come in several...
  6. tg3690

    How long have you owned a Chrysler Outboard and what has been your experience

    "So I guess your engine overheated and ruined the powerhead." That's it.....was running near WOT when it suddenly started slowing down and died. Only then could I hear the overheat buzzer under the console. Back then I wasn't aware about changing the impeller every couple years or so and...
  7. tg3690

    How long have you owned a Chrysler Outboard and what has been your experience

    1978.....my dad bought the family a brand new Caddo bass boat with the 85hp Chrysler that year and have been using it ever since. The engine has worked remarkably well over the years, despite some periods of "setting up" and lack of regular maintenance from the ignorant owners. Lol. In the...
  8. tg3690

    Saftey cut-off lanyard now required by Federal law?

    Life jackets and kill switches.....(y)
  9. tg3690

    Trim and tilt visible leaks

    My thoughts on the price......$89 for the tool or $150+ for a used tilt cylinder on ebay....or $200 for a rebuilt unit from Franz Marine.....I ended up buying the one from Franz after I damaged mine by not using the proper tool and employing unsound shop practices...lol
  10. tg3690

    Trim and tilt visible leaks

    https://www.offshoremarineparts.com/916-19-utt.html This is the one I used on mine......kind of pricy but works well.
  11. tg3690

    1990 Force 90hp oberheated

    "Hose clamp?? coolant line?? Pictures please? I don't remember any coolant lines??" Had me thinking hard about this one! Don't remember any coolant lines either.....
  12. tg3690

    Trim and tilt visible leaks

    Recently replaced the trim cylinder o-rings in mine....sprayed PB blaster on the bolts the night before....came apart surprisingly easy, but this is a freshwater motor.....Sarasota salt water might be a different story...
  13. tg3690

    Tilt Cylinders Leaking

    Thanks for the update.....I recall you saying you ordered the little orings for the check valves and was wondering how that went.....hope you get it fixed.
  14. tg3690

    Tilt Cylinders Leaking

    I agree Jerry.....it had been almost 2 weeks since his last post....was wondering if he was able to do the valve body repair.....mine didn't go so well...lol
  15. tg3690

    Tilt Cylinders Leaking

    Were you able to get it fixed robman? The suspense is killin me. lol
  16. tg3690

    Rebuilding 1991 120 lower unit

    STILL not locked up! :ROFLMAO:
  17. tg3690

    Outboard Jet Drive

    Thanks for the info....have read that Outboardjets makes the jet drives for all of them.
  18. tg3690

    Is there a pee hole on a force 1996 Force 75hp outboard ?

    Close! But no cigar! :ROFLMAO::ROFLMAO:
  19. tg3690

    Tilt Cylinders Leaking

    Glad it worked out.....think you are right about the valve body needing work....
  20. tg3690

    Is there a pee hole on a force 1996 Force 75hp outboard ?

    Things got weird when Mercury took over the Force engines.....I will admit my post was inaccurate or flat out wrong.....thanks for clearing that up roscoe.....learn something new everyday....lol
Top