Search results

  1. alldodge

    Second Boarding Ladder . . .

    Nice work, but those corners look like something waiting to get someone hurt. Slip off the swim deck, or just bump into it.
  2. alldodge

    Cracked 5.7 engine

    Also agree with Scott and Bondo
  3. alldodge

    Making sure I purchased the correct coil for a 1996 5.7L

    Yes its TB5 the first item 26 https://www.mercruiserparts.com/bam/subassembly/31770/1939/40
  4. alldodge

    Timing indicator

    Probably not a crate motor, or previous motor was replaced prior and came out of a truck. Truck motor is same as a boat, so no issue there. Could use a piston stop bolt to find accurate TDC. Use timing tape and be good to go
  5. alldodge

    Volvo Penta 3.0 | Belt is not centered on pulley | Thoughts?

    Needs to be more centered IMO Is the bolt long enough to place a washer behind it, or maybe on the bracket?
  6. alldodge

    Making sure I purchased the correct coil for a 1996 5.7L

    Dang, carb and only number 7 tuliped, that's different A tuliped valve is caused by lean mix and its got to hot in the cylinder. Your serial number shows TB5
  7. alldodge

    Shift cutout switch not working even after replacement

    Knock knock , hello No need to trace wiring unless there is something wrong with it. To find out what it should be we need to know if you have points or some kind of electronic type
  8. alldodge

    Making sure I purchased the correct coil for a 1996 5.7L

    Suggest getting the injectors flow tested
  9. alldodge

    Reputable engine source?

    Many here used Michigan Motorz
  10. alldodge

    Ford 302 thermostat housing

    Not exact design, but may work. Need to block off the one port https://www.mrcool.us/29-0083-mercruiser-ford-thermostat-housing.html
  11. alldodge

    Ford 302 thermostat housing

    Don't know if your open or closed cool, but here is the upper and lower for open. https://marineengineparts.com/exhaust-cooling/thermostats-housings/mercruiser-ford-engines/ If your willing to change exhaust system to newer type might be able to use another style
  12. alldodge

    Bravo 3 lower unit blown seals and corrosion

    Need the manual, and if yours pre 2000 need manual 11 and 2000 on manual 28 Use seals for 2000 on because they work better and do fit. 1 each Small inner seal 26-8M0033407 (replaces 2 each lip seals) 1 each Large outer seal 26-861694 (replaces 2 each lip seals) Dimensions 3 - 3/8 OD, 2 - 1/2...
  13. alldodge

    Mercruiser 3.0 TKI engine crank half time - never starts

    What ever helps ya get through the night, all good
  14. alldodge

    2002 Mercruiser 5 liter MPI Distributor Timing

    Thanks, issue with that is if the damper notch can be a few degrees off. To make sure its a true TDC would need a stop bolt or a micrometer probing the top of the piston. Your motor is running and with that as @Fun Times mentioned in the other thread, loosen the Dizzy and ever so slightly...
  15. alldodge

    2002 Mercruiser 5 liter MPI Distributor Timing

    Maybe, first tell me how you determined the motor is at TDC?
  16. alldodge

    2002 Mercruiser 5 liter MPI Distributor Timing

    No that's not close enough IF it was at TDC. If you are at TDC then lift the Dizzy out enough to disengage gear and rotate Should have also also posted this one to your previous thread https://forums.iboats.com/threads/02-mercruiser-5-liter-mpi-rough-running.756751/#post-5769891
  17. alldodge

    Mercruiser 3.0 TKI engine crank half time - never starts

    I have lock and flat, the lock doesn't come in contact with the cable ends
  18. alldodge

    Shift cutout switch not working even after replacement

    You said old 3.0 which could mean may things. Could be points Dizzy or TB Dizzy. Points uses a ground to make the motor stumble and TB uses 12V. Do you know if the other end of the shift interruptor actually connects to a ground or 12V?
  19. alldodge

    Bravo 3 Prop Help

    If it was running good before the change in elevation, then not so much. That said its a new to you boat so checking pressure is a good thing. If your motor has the flat dizzy cap, then changing or having a spare on the boat is a good thing. Those caps have been know to cause problems and...
  20. alldodge

    Mixing Lights and Grounding questions

    I would run a ground to trailer just because it won't hurt anything and may help Yes, this is no issue. Just note the LED's do have a + and - side
Top