Search results

  1. R

    1972 evinrude 6hp issues

    Was the water tube installed in the exhaust first ?-----Before to installed the lower unit ?
  2. R

    65hp Johnson hydroelectric shift problem

    Check the gear oil.-----Then take lower unit apart.----Gears are stripped is my guess.
  3. R

    Gale Buccaneer 25hp year needed

    Johnson / Evinrude parts fit.
  4. R

    Twin 2.6 omc outboards

    Details first.-----Model # ?----Are you sure it is a 35 amp stator on a 1982 model?
  5. R

    50hp Yamaha 2 stroke outboard fuel problem?

    Start with a compression test.-----Post your numbers.----Then see if each lead has spark that will jump a gap of 3/8" ( 1 cm ) on all leads.
  6. R

    89 28SPL Misfire both cylinders. ideas, and repair manuals?

    Repair manual for a 25 or 30 HP would be ideal for that engine.
  7. R

    1968 Johnson Tr-10r 55hp wiring help

    The 6 volt system was last used in 1956 I think.
  8. R

    1980 Evinrude 35 horse

    Motor needs to come apart for proper repairs.
  9. R

    Link & Sync 1990 15Hp Evinrude

    These repairs are easy.
  10. R

    Please help 1975 mercury 200 20hp

    Too far away for shipping of parts !!
  11. R

    etec oil pump in the ficht brp motor

    What is wrong with your oil pump ?------evinrudeparts.ca ----might help.
  12. R

    compatibility

    A 56 carburetor ???---And a 1956 model 25 HP ?-----I thought the 56 was a 30 HP motor.-----Post #1 mentions 76 and 78 motors ?
  13. R

    Please help 1975 mercury 200 20hp

    Too bad you are 1500 miles away.
  14. R

    Can a 6hp impeller work on a 9.5 1967?

    Driveshaft is different diameter.--The 6 is 0.437" and 9.5 is 0.550" going from memory.------Nothing wrong with the 9.5 impeller / water pump set-up.----Contact ---evinrudeparts.ca-----for factory ( good ) parts.----I have put bad pump housings in a 4 jaw chuck on a lathe to return them to...
  15. R

    Please help 1975 mercury 200 20hp

    How badly is it bent ?----Should be easy to change a good ( not bent ) propshaft.---Or have your local machine shop straighten it ?------Find one and ask how to change it
  16. R

    compatibility

    There should be no reason to replace a carburetor.-----Unless it has been molested.-----What trouble shooting has been done.-----Gear oil checked ?------Prop shaft possibly bent ?
  17. R

    1982 50hp dies when throttle applied

    Flywheel key checked ?-----Is the motor running on both cylinders.------Post compression numbers.----Should be 140 PSI or more. -----Motor should not be run with overheat horn disabled !----Does spark jump a gap of 3/8" or more on a test device ?-----High speed jets in the BOTTOM of the float...
  18. R

    Yamaha 90 slows down after about 15 mins.

    Have you installed a new water pump impeller ??-----Tested the overheat horn ?-----Fuel mixed at 50:1 ?----Checked gear oil ?------Exhaust housing is clear , not partially plugged ?
  19. R

    40 hp twin engines

    Very good idea.-----First evaluate the 115 HP motor.------Model # of the 115 HP ??
  20. R

    Please help 1975 mercury 200 20hp

    Your location ?
Top