Search results

  1. alldodge

    Exhaust Manifolds and risers on 4.3L, how to tell when they need to be replaced?

    Here is a V6 but they also make them in V8
  2. alldodge

    No! Emergency ;) :) :) :)

    Have 10 1/2 inches on the ground
  3. alldodge

    Where do I clearance the gimbal ring?

    pic
  4. alldodge

    surge brake problems

    Good to hear they are going to help. Agree trying to back up disc without a block off is just no good. If you have a lock out like on this attwood coupler you can get it to back up, by moving the lever down
  5. alldodge

    1979 Switzer Super Sport Molding/RubRail

    Found a Switzer and appears to be something like what Seadoo used on their older models. Issue from the pics I cannot tell how it is held in place. Found several places which sell the rub rail and look at this one. It is two piece but may work. What keeps the top and bottom together...
  6. alldodge

    Installation of electric fuel pump 2003 90 HP Johnson OB

    Just thought of something that could expand on what Faztbullet listed in the previous link and pic below. Instead of installing a check valve where shown, just place your primer bulb inline where the hose is shown. The primer bulb has the check valve in it.
  7. alldodge

    Gas gauge sending unit/ '95 Bayliner LS1700

    I would start to verify that it is the sending unit. Get to the back of the gauge and check for 12V when the key is turn ON. If 12V is present ground the pink wire off the S terminal, the gauge should peg full. If this all works then you will need to get to the tank.
  8. alldodge

    Cant find this part anywhere?!

    If you had your serial number it would help, you could just look it up https://www.mercurymarine.com/en/us/parts-and-accessories/parts-catalog Are you talking about item 14
  9. alldodge

    1991 rinker trolling motor help!

    You could add an access cover and then add clips to reinstall the seat
  10. alldodge

    Water distribution housing leak

    Here is a pic of the front of the motor of the earlier model. A serial number is best for us to help out. Also have a question are you using the purge pump every time you pull the boat out?
  11. alldodge

    Strange starter problem

    Looks like you have a remanufactured 350 by Mercruiser . The standard 350 has a 4.000 bore x 3.48 stroke. If the block is bored .030 and increase the stroke (3.75) you get a 383. The image below I got from Merc site...
  12. alldodge

    Formula 272 Outdrive Corrosion?

    Howdy Yes zincs are missing and only 192 hours I would not believe. My guess is the meter was replaced just ask why. The price is about average retail, so start there and go down if you find issues like the drives. Zincs a cheap but if the boat sits on the trailer it doesn't need them. Just...
  13. alldodge

    Streaming TV

    Had a look, this is the one I have and looks just like the 1000 other then a new style LNB
  14. alldodge

    Shift Shaft pops out when pressure test is done.

    This one
  15. alldodge

    Strange starter problem

    Only way to get a 383 is to bore a 350 and put a 400 crank in it, or take a brand new 377 (Mercruiser 350 with 400 crank) and bore it. I'm going to say that, until you tell me otherwise that you have a 2014 or 2015 377 MPI. That said, there is a slave solenoid and a starter solenoid, the slave...
  16. alldodge

    Pulling Engine, can't pull straight up.

    Would have no issue doing this myself, SBC not really that heavy, shouldn't take a lot. As for the GEN, I don't think so but I'm not there to measure. I pulled my big block out and back in and had to remove ALT and water pump prior. You appear to have more room. While mine was not under the...
  17. alldodge

    Pulling Engine, can't pull straight up.

    Found a pic, needed to search carne pallet forks
  18. alldodge

    Streaming TV

    Streamed my first show from DSL to laptop to TV (SYFY show) and got caught up on a show. This got me thinking about why not stream everything, but everything is probably not available. Do like my DVR and watch shows without commercials, also can pause and rewind. There is no TV air waves...
  19. alldodge

    Pulling Engine, can't pull straight up.

    Don't need to measure just trying to get a feel where the center of the motor is. Think your going to need some kind of cantilever with enough height to clear the rear deck, or use long straps and have a lot of help to hold it when lifting and lowering. Many manufactures use cantilever...
  20. alldodge

    how to set base timing on 5.0 mpi

    It's kind of late now buy why did you remove the distributer just to replace the cap? If the cap was to be removed, you were to scribe a line on the distributer and block so it can be dropped back into the exact place where it was removed. Now that it's no longer where it needs to be is you...
Top