Search results

  1. N

    Force 120 won’t shift into reverse, will on muffs.

    We need to know the model number or a pic to help you. They started to change the LU from Chrysler style to Mercury style in mid 90:es. If it has the Chrysler style, yes there could be an adjustment issue. I have not worked with the Mercury style, so maybe some other will chime in.
  2. N

    Throttle cable maintenance and adjust basics? Force 85 H.P. or other..

    You find the Youtube video by searching (google) "carb and timing tutorial". You find more good information at the sticker in top of this site. Force & Chrysler FAQ and other great information
  3. N

    1966 6HP Chrysler Model 6601-02-03 - looking for parts

    Franz Marine service, he will have if available.
  4. N

    Help with 1974 chrysler 1057hf

    Your engine has Magna Power I system, not Magna Power II. Magna Power II is completely different. Your system must have power from battery to charge the capacitors in the CD box. The dist. has either points or a preamp which trigger the CD box to fire. As you have spark at #1 and #4 check the...
  5. N

    125 Force Outboard won’t achieve full power

    The low speed circuit are acting even when high speed. The Wallboro and Tillotson carbs on Chrysler/Force are working like that.
  6. N

    Hi all so back kind of after a rebuild as found broken rings not causing any problems but once seen

    125 I have answered your PM.
  7. N

    Force 125hp not wanting to idle

    Sounds like it has a lean setting of the air/fuel mixture screw at the carbs. I think the OEM manual says 1 turn out from seated, try to turn the mixture screws 1 1/8 or 1 1/4 of a turn out from seated. Maybe you have to adjust the idle screw too. It should idle 1200 RPM at muffs and 7-800 RPM...
  8. N

    3.5 chrysler outboard

    Try Franze Marine, he will have if it is available.
  9. N

    How to Test trigger and stator on Force -125 hp outboard

    Look at Mastertech Marine web site. They have diagram for Chrysler 125 Hp Prestolite ignition. You find it under Tech spec/ common wire diagrams/ Chrysler Force.
  10. N

    How to Test trigger and stator on Force -125 hp outboard

    You can test the resistance in the windings with a VOM, but even a good result of it maybe a bad stator. The best way is to measure the output from the stator and trigger. Using a DVA meter (special for OB and other vehicle troubleshooting) or a VOM with a DVA adapter. The output from the stator...
  11. N

    Looking for Force part COVER ASSY 818074A1

    Check with Franz Marine, he will have it if it is available or he has NOS part.
  12. N

    1988 Force 88 hp, help on wiring cdi

    Send me a PM and I will send you back the wire diagram as a pdf file.
  13. N

    Is this normal wear on a distributor belt?

    Right tools and it will go really easy. Have only have one flywheel that did not come loose in my about 25 years playing with outboards. You do not have to make a mark when change the belt. The distributor pulley has a line and an arrow at the top. It is a curved line that shall follow the...
  14. N

    So i decided to pull the powerhead off....

    As racerone says the piston is tapered. Factory manual spec for a new std. piston has two different measure at two different part of the piston. Piston top just under the lower ring. MAJ. Major diameter measured 90 dgr to piston center line ... 3,3003-3,2993. MIN. Minor diameter measured on...
  15. N

    So i decided to pull the powerhead off....

    If the cylinder walls are good just put new std piston with new rings in and hone the bore. As racerone says the std bore from factory is 3,312 in. You will find pistons and rings from different web sites such as this one, Master tech Marine and a lot of others. Best source in my opinion is...
  16. N

    Chrysler 75 hp. Difference in spacer plate to same motor?

    ErSa, it is a water cooling jacket as I said when you where at my house. I have had some issues with some small leakage at that surface after reassembling power heads. It wants to drip some water there. I do not know why they change it during Force brand, maybe because they stop with the by pass...
  17. N

    Chrysler fuel pump

    That pump will fit, but as racerone says pull your apart and check the diaphragm. OEM diaphragm is F438747 and gasket 820490 (F438760) Sierra aftermarket kit which includes some other gaskets too is 18-7806-1. BTW: I see you have the DELTA CD box and the ignition coil is not the OEM. My...
  18. N

    1977 Chrysler 10hp 100HA cowling

    If it not is an autoelectric model and in 1977 I think the autoelectric model was not in production that late all hoods for previous 9.9, 10, 12.9 and 15Hp will fit. Maybe the 12,9 and 15Hp do not fit, to big. The autoelectric model had a top arrangment on the hood for the dyna starter. It did...
  19. N

    1965 West Bend by Chrysler

    That is a 4 cylinder West Bend Tiger Shark 80Hp. Maybe it is a 1964 or earlier. I would suggest you to contact Franz Marine. Maybe he will be able to help you. Nice engine and I think they are rare. I have only seen one here in Sweden and it was in a pic.
  20. N

    1995 Force 50 Turns over, doesn’t start

    Do you activate the cold start function when trying to start? The cold start only give you some more throttle with out activate the gear shift. Depending on typ of remote control there are different procedure for cold start. Some controls you pull the throttle lever out and push it forward. Some...
Top