Search results

  1. jimmbo

    Need advice

    If they sent you an engine that wasn't the one you ordered, but charged you the price for the one ordered, then they shouldn't be trying to Jack you up for more, in fact they should be paying the return Shipping, and the cost of shipping the Correct Engine. Is there an Office in your State for...
  2. jimmbo

    Jack Plate question regarding short shaft vs. long (standard) shaft

    Looking at the Picture, I don't have any Confidence in that Transom. It looks like there are several places where water will get in, and torn Fiberglass.
  3. jimmbo

    Need advice

    Did they ship the engine that you Ordered? Your post implies you may have ordered the Wrong Engine. If that the case, it was your mess up, not theirs, and if there is a Price Difference, you would be expected to pay it.
  4. jimmbo

    It's time, advice...

    Semi Legal Tow Boat. Where's the Spotter? When in the Water, bring your Knees to your Chest, then place your Arms around your Knees, that usually keeps the Skies in line upon initial pull. Then just keep your Arms straight, like they are an extension of the rope. as you pop out, you can assume...
  5. jimmbo

    Merc 5.7, alpha 1 gen2, Rochester marine 4bbl flood gushing up out of bowl/float vent!?!

    Yours doesn't have a Retainer(green Arrow) on the Primary Power Piston?
  6. jimmbo

    Merc 5.7, alpha 1 gen2, Rochester marine 4bbl flood gushing up out of bowl/float vent!?!

    The Needle is part of the Inlet Valve, the other part is the Seat
  7. jimmbo

    Merc 5.7, alpha 1 gen2, Rochester marine 4bbl flood gushing up out of bowl/float vent!?!

    Welcome to iboats Did you set the Float Correctly? Is the Inlet Seat tightened, and a gasket used? It the Needle of the Float/Inlet Valve in place? Is the Float free to move so as to be able to Close the Valve?
  8. jimmbo

    1980s mercury 115 tower of power issues!

    Spraying copious amounts of Carb Cleaner in the the carb really does F all, except cleaning the Throat, and Throttle Valve, and reeds. To clean the Carb it needs to be removed, disassembled, and subjected to the Cleaner. The Floats on those Tillotson Carbs have tendency to get stuck(at least the...
  9. jimmbo

    A disaster waiting to happen

    The straps themselves are quite strong, but some the other Hardware used on the Straps, mainly the Pivot/Rotation points, used for tightening, are very weak shearable metal
  10. jimmbo

    Bow mount fuel tank. Balance?

    Placing the tank at the front will bring the bow down, but as the Fuel is consumed, the weight is reduced
  11. jimmbo

    High fuel pressure issue

    No, but the ones who don't keep up on Maintenance, might
  12. jimmbo

    High fuel pressure issue

    More hoses to and from the Tank, means more potential for Leaks
  13. jimmbo

    High fuel pressure issue

    If I was running EFI, I would always be thinking, 'Okay, I know this Damn thing will Fail, but when?'.
  14. jimmbo

    1985 evinrude 30 hp prop power issue

    You have an actual OMC manual, or some 3rd Party manual that covers OMC outboards?
  15. jimmbo

    98 Evinrude 115 carb adjustment?

    Looper Engine. As racer said, compression test. Also does the engine have Spark, good enough to jump a 3/8" Gap? As mentioned, clean all the Electrical Connections between the Battery and Starter, and clean the Bendix and lube it. Is the Battery in good shape, still having most of it's Capacity?
  16. jimmbo

    High fuel pressure issue

    I apologize in advance as this doesn't solve the problem, but Carbed engines are so much easier to troubleshoot when things go wonky. Same goes for Mechanical Advance Distributors
  17. jimmbo

    1985 evinrude 30 hp prop power issue

    The procedure is in the manual, you may have to read the Fuel and Ignition sections fully, but it is in there.
  18. jimmbo

    A disaster waiting to happen

    Quite a few Stuart Pidds, Stu for short, towing. Sometimes they kill themselves, which is Good, but more often they take others with them, which could be good or bad, depending on whether or not the others are from the same Gene Pool as Stuart...
  19. jimmbo

    1985 evinrude 30 hp prop power issue

    Revving in Neutral means F all. Do you have a Service Manual, hopefully a Factory one?
  20. jimmbo

    Triton 18ft Roller Trailer Alignment Question

    Looking at the Picture taken from behind. It looks like the trailer is Twisted, look at the Tongue Tube, then look at the A Frames
Top