Search results

  1. R

    Gear oil leak 1985 9.9 Evinrude

    Just run it.-----But remember these motors do NOT have an overheat warning / shutdown system.------They will overheat and run till they come to a " dynamic halt " and it results is expensive repairs.----Your call I say.
  2. R

    Gear oil leak 1985 9.9 Evinrude

    Many different answers / opinions will be given.-----I do not know the maintenance history of your motor.------I do not know the tools and ability that lives in your workshop.--------This could well be normal , from oil mixed with the fuel.----No water in the gear oil is a good sign.----I own...
  3. R

    1978 18ft Mariner: I won this "Pig in a Poke" on Ebay..!

    Looks like a homemade center console.-----A package like that would be $30,000 + new.-------A very good plan to remove floor / replace transom.------A boat like that properly fixed will give you years of enjoyment.
  4. R

    Default Knocking / rattle sound in 40hp outboard - Lower leg?

    Shift linkage is not the issue.-----Check spark on each lead.-----Possibly running on 2 cylinders.
  5. R

    Deck repair looks like might need new stringers and any other advice.

    Typical boat construction.--------Make a hull in a mold.---Then add some plywood structure.-----Pour in some expanding foam.----Put floor down.-----Foam adds strength and quieteness. -----Done.-------No concern as to what happens when water gets in there after 15 years.-----Doing a boat...
  6. R

    1984 johnson 90hp carb leaking fuel out air cleaner

    Is there a wee hose that comes from the back of the air box?-----If yes , does that hose go to a nipple ?
  7. R

    1982 15HP Johnson

    Should be exactly the same.----What do you mean by " government work " here ?
  8. R

    Tilt and trim unit interchange.

    The concept of the SPL model was economy / lower price.-----Therefor no trim / tilt or oil injection from factory.
  9. R

    75hp Lower Unit - confirming reverse gear is engaged

    Sorry-----You have to look on another parts page to find the " shift slide "----for this motor !!
  10. R

    75hp Lower Unit - confirming reverse gear is engaged

    The control box and cable hold it in reverse.
  11. R

    75hp Lower Unit - confirming reverse gear is engaged

    ??----There is a strong spring in there.-----It will kick it out of reverse in the blink of an eye.-----Hold the shift rod in reverse and test.----This is simpler than you can imagine !
  12. R

    Prop suggestions

    That would be a V-6 lower unit on that 130 HP.-----Have the boat weighed.------If it has foam flotation it could be waterlogged.
  13. R

    Question on steering hook up

    Likely easy to make a bracket to attach tiller cable.-----I think bolt holes might be there already on the motor.
  14. R

    1995 15 hp 2 stroke mariner with controls.no pee.

    Is the water in your test bucket 6 or 8 " above the impeller ?----Serial # of your motor ?
  15. R

    1984 johnson 90hp carb leaking fuel out air cleaner

    Those screws ( in red circle ) hold the reed boxes.----So you might have to look into that and replace those 4 gaskets.----That hole with the " missing bolt " might not be used for your year.-----I believe that hole was used for a shift pivot bolt on the 73 to 77 V-4 models.
  16. R

    Cowl replacement or repair.

    Your location ?---Pictures of the damage.
  17. R

    96 evinrude no spark

    A 2 or 3 cylinder motor ?
  18. R

    Year model

    Correct.
  19. R

    Just Purchased used 175 Yamaha Outboard (Are theses good engines)

    As machinery gets more complicated , expensive and easy to operate.-------The initial " new feel " is just wonderful.-----But as these new outboards get older there will cases of sad faces.-----Often some of this complicated electronic stuff can not be fixed or parts just are not easy to...
  20. R

    Long shaft vs short shaft

    Many Johnson / Evinrude models are simple to convert from long to short shaft.----Be less work than raising transom of your boat.
Top