Search results

  1. Scott Danforth

    Random

    I had an American Bull Mastiff that used to sit on the carpet......fart, turn around, smell the carpet, then move away..... you could almost see the stench coming as a black-green cloud.
  2. Scott Danforth

    Mid 70s Ebbtide Interior

    I would start with a google search and go from there. https://www.google.com/search?sxsrf=ALeKk013pe-WsMJO9JpU3mGuNUkktuBrPA:1612716774860&source=univ&tbm=isch&q=1970+ebbtide+tri-hull&client=firefox-b-1-d&sa=X&ved=2ahUKEwjanfSTntjuAhUQlFkKHSC0CnUQ7Al6BAgEEA8&biw=1384&bih=1067 personally i...
  3. Scott Danforth

    Mid 70s Ebbtide Interior

    Vinyl lasts 15 years. You are going to have to search a local upholstery shop to make a new interior, or make it yourself
  4. Scott Danforth

    MirrorCraft Restoration Year?

    First, welcome aboard second, the boats were made by Mirro over 50 years ago, then the name was sold to Northport in TN in about 1970 when Mirro got out of the boat business in Manitowoc in about 1970, and completely went out of business decades ago. (born and raised there). emailing...
  5. Scott Danforth

    Help identifying a boat that I picked up.

    first, all the information that is important is in the title and registration. I assume you have that. if not, you own a yard planter now, assuming you have a title and registration in hand. what does the title say the boat is. beyond that, what other information do you need. other than 4...
  6. Scott Danforth

    Opinions? - Spraying Gelcoat Difficulty??

    spraying gel is easy. no need for a dump gun. you do need a HVLP gun with a 2.0 or 2.3 nozzle. get the vapor brand, the correct one will be green. Amazon or northern tool (about half of buying the exact same gun from your local fiberglass supply house)...
  7. Scott Danforth

    Engine Compatibility

    depends on how creative you are. there have been two electric conversions so far. the problem is you only get about 25 miles of use. if you have a 165, you most likely have the in-line 6. you can swap over to a 4.3 V6 and save some weight.
  8. Scott Danforth

    volvo penta 151b

    the base motor doesnt know its in a boat. especially the heat exchanged motors. the only difference between a heat exchanged boat motor and the motor in a volvo car, one has a radiator, one has a heat exchanger. the pistons, rods, bearings, and most gaskets are the same. regarding...
  9. Scott Danforth

    74 omc 190 engine zincs location

    Maintenance and flushing If you intend to boat in salt water, the motor is less of an issue than the drive.
  10. Scott Danforth

    1987 Glasstream 172 cutlass project.

    To stabilize the hull so you dont add a hook or rocker. That motor needs to come out prior
  11. Scott Danforth

    Potential Purchase of a Rinker.. Thoughts?

    the only issues I have are as follows: if the hull and foam are full of water, you wont know it until spring. 32 years is past a boats "prime" and "sell by" date. most boats are designed to last 15 years. any fiberglass boat that old should be considered a project. it may be a diamond in...
  12. Scott Danforth

    Buying a boat with a rebuilt sterndrive??

    first, welcome aboard second, what are you worried about? most boats dont have hour meters. they generally do not get worn out in a recreational boat. they do get murdered. a 19' boat with a 4.3 would normally go 4000 hours with proper maintenance. the average boater puts on 20 hours a...
  13. Scott Danforth

    1987 Glasstream 172 cutlass project.

    before you go any further with your demolition, you will need to pull the drive and motor out of the hull and stabilize the hull with a cradle of sorts. you can build a cradle right on the trailer if you want.
  14. Scott Danforth

    Crack in top coat

    just coming into season, fiberglass guys are busy, most putting in about 80 hours a week.
  15. Scott Danforth

    Transported a 4 stroke

    fuel.... you may want fuel as well. in all seriousness, with a new to you 22 year old motor. you may want to also change the impeller, pressure test the leg and replace the gear oil.
  16. Scott Danforth

    Crack in top coat

    could be, however Micky's comment on hull flex/twist is more like it. most boats will crack where the gunwales meet the transom.
  17. Scott Danforth

    losing lower unit oil

    first, drain oil and pressure check the gear case. it could be the 4 screws holding in the bearing carrier could be the o-rings on the bearing carrier it could be a seal it could be a crack
  18. Scott Danforth

    Crack in top coat

    gel coat cracks are common. especially on many newer styled boats with lots of compartments. if the boat is about 15 years of age it will really start showing cracks. in the hull restoration forum stickies is a guide on repairing gel cracks.
  19. Scott Danforth

    Repairing Plexiglass Windshield

    local guy by me gets about $100 for a windshield with 3 bends. $80 for a single bend.
  20. Scott Danforth

    Deck repair looks like might need new stringers and any other advice.

    use an engine hoist to pull the motor. you should be able to do it without much effort with the 3.0
Top